Maintenance and care, Thermal motor protection

Maintenance and care

Cleaning the pre-motor and post-motor filter

Filters protect the motor from dirt and dust particles. Use only BISSELL replacement filters in your Zing

1.Turn the power OFF (). Unplug the vacuum from electrical outlet.

2.Disconnect hose

3.Open the dust bag compartment by lifting up on the door latch at the front of the vacuum. Lift out the dust bag holder and dust bag.

4.Remove the filter frame from the filter holder by grasping the lip of the frame and pulling up.

5.Remove the filter from the filter frame and clean by hand washing in warm water. A mild detergent can be used if desired. Allow the filter to air dry completely before replacing.

6.Place the filter back into the filter frame and replace back into the filter holder.

NOTE: The filter frame should be placed so the protective frame is visible.

7.Place dust bag holder and dust bag into the dust bag compartment, making sure the entire bag is tucked in below the seal gasket.

8.Close dust bag compartment door and press down gently until it locks into place.

9.Reconnect hose.

NOTICE:

This product is intended for house- hold use only and not for commer- cial or industrial use. Vacuuming of dust from products like plaster, concrete or ashes will damage the motor and void the warranty.

Pre-Motor

Filter

Post-Motor

Filter

Thermal motor protection

An internal thermal protector has been designed into your cleaner to protect it from overheating. When the thermal protector activates, the main vacuum motor will stop operating. If this happens, proceed as follows.

1.Turn the cleaner OFF and unplug from electrical outlet.

2.Check the cleaner for the source of overheating problem (ie. Full dirt cup, dirty filters or clog).

3.Fix the problem by following the steps in the maintenance section of the user guide.

4.When the motor cools for approximately 30 minutes, the thermal protector will reset and cleaning may continue. If the cleaner will not

Tip:

For maximum cleaning performance, check the filters often and clean or replace if necessary.

WARNING:

Do not operate cleaner with damp or wet filters or without all filters in place.

turn on or the thermal protector continues to activate, your cleaner may need servicing. Call BISSELL Consumer Services or visit the website.

w w w . b i s s e l l . c a

1 - 8 0 0 - 2 6 3 - 2 5 3 5

22Q3 specifications

The Bissell 22Q3 is a powerful carpet cleaner designed for both residential and commercial use, making it a versatile choice for anyone looking to maintain the cleanliness and longevity of their carpets. This model is packed with features and technologies that enhance its performance, ensuring deep cleaning with ease and efficiency.

One of the standout features of the Bissell 22Q3 is its powerful cleaning system, which combines a strong suction and a rotating brush to effectively remove dirt, stains, and allergens from carpets and upholstery. The dual-action technology ensures that the cleaner not only lifts dirt from the surface but also penetrates deep into the fibers, providing a thorough and comprehensive clean.

The Bissell 22Q3 is equipped with a large water tank that holds enough solution to tackle big jobs without frequent refills. This feature is particularly beneficial for larger homes or spaces with heavy foot traffic. Additionally, the tank is easy to fill and empty, simplifying the cleaning process and ensuring that users can maintain their focus on getting the job done efficiently.

Another significant characteristic of the Bissell 22Q3 is its lightweight design. Weighing in at under 15 pounds, it is easy to maneuver and transport, allowing users to clean their carpets without the strain often associated with heavier machines. The ergonomic handle further enhances comfort, making it a user-friendly option for prolonged cleaning sessions.

The Bissell 22Q3 incorporates advanced technology for smarter cleaning. It features a heatwave technology that helps maintain water temperature throughout the cleaning process, ensuring that the cleaning solution remains effective. This innovation can significantly improve the results, especially when tackling tough, set-in stains.

Moreover, the Bissell 22Q3 also includes specialized tools for upholstery cleaning and pet stain removal, making it an excellent choice for pet owners. These tools are designed to reach difficult areas and effectively lift stubborn dirt and pet hair.

In summary, the Bissell 22Q3 stands out as an exceptional carpet cleaner with its powerful suction, lightweight design, large water tank, and useful specialized tools. With advanced technologies like heatwave technology, users can achieve professional-level cleaning results at home, making this model a reliable addition to any cleaning arsenal. Whether dealing with everyday messes or tough stains, the Bissell 22Q3 is equipped to handle any challenge, ensuring carpets look and feel fresh and rejuvenated.