Bissell 22Q3 warranty Bag change indicator, Dust bag replacement

Page 7

Operations

Bag change indicator

The bag change indicator is located below the swivel hose. If the bag change indicator turns orange while you are vacuuming, the dust bag needs to be replaced. The dust bag may appear to be full or only par- tially full depending upon the type of debris picked up. Fine particles can block the airflow in the dust bag and reduce suction before the dust bag is full. If the bag change indicator remains orange, even after changing the dust bag, turn the vacuum off and check for a clog in the hose or tools.

Bag Change Indicator

Dust bag replacement

1. Turn the power OFF ( ). Unplug the vacuum from electrical outlet.

2.Disconnect hose

3.Open the dust bag compartment by lift- ing up on the latch on the door on the front of the vacuum.

4.Lift out the dust bag holder and dust bag.

5.Release the dust bag from the holder by pressing the dust bag holder clip and pulling the dust bag out of the holder. Discard the used dust bag.

6.Slide the new dust bag into the holder by inserting the dust bag into the tabs located at the bottom of the holder.

Then press the dust bag holder clip, insert the dust bag and release the dust bag holder clip to hold the dust bag in place.

7.Place holder and new dust bag back into the dust bag compartment, making sure the entire bag is tucked in below the seal gasket.

8.Close dust bag compartment door and press down gently until it locks into place.

NOTE: The dust bag compartment door will not close without the dust bag in place.

3.

4.

5.

WARNING:

To reduce the risk of electric shock, turn power switch OFF and dis- connect plug from electrical outlet before performing maintenance or troubleshooting checks.

9.Reconnect hose.

7

w w w . b i s s e l l . c a

1 - 8 0 0 - 2 6 3 - 2 5 3 5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Users Guide Mark J. Bissell Chairman, President & CEO Reduce the risk of fire, electric shock, or injury Important Safety InstructionsProduct view Operations AssemblySpecial tools Automatic cord rewind Power cordPower button Variable suction power controlDust bag replacement Bag change indicatorCleaning the pre-motor and post-motor filter Maintenance and careThermal motor protection Possible causes Remedies TroubleshootingPossible causes Remedies203-7508 Floor Nozzle Replacement parts Bissell vacuumAccessories Part NameOr write Warranty Bissell Zing Compact VacuumWebsite Or CallBissell consumer services Bissell Consumer Services

22Q3 specifications

The Bissell 22Q3 is a powerful carpet cleaner designed for both residential and commercial use, making it a versatile choice for anyone looking to maintain the cleanliness and longevity of their carpets. This model is packed with features and technologies that enhance its performance, ensuring deep cleaning with ease and efficiency.

One of the standout features of the Bissell 22Q3 is its powerful cleaning system, which combines a strong suction and a rotating brush to effectively remove dirt, stains, and allergens from carpets and upholstery. The dual-action technology ensures that the cleaner not only lifts dirt from the surface but also penetrates deep into the fibers, providing a thorough and comprehensive clean.

The Bissell 22Q3 is equipped with a large water tank that holds enough solution to tackle big jobs without frequent refills. This feature is particularly beneficial for larger homes or spaces with heavy foot traffic. Additionally, the tank is easy to fill and empty, simplifying the cleaning process and ensuring that users can maintain their focus on getting the job done efficiently.

Another significant characteristic of the Bissell 22Q3 is its lightweight design. Weighing in at under 15 pounds, it is easy to maneuver and transport, allowing users to clean their carpets without the strain often associated with heavier machines. The ergonomic handle further enhances comfort, making it a user-friendly option for prolonged cleaning sessions.

The Bissell 22Q3 incorporates advanced technology for smarter cleaning. It features a heatwave technology that helps maintain water temperature throughout the cleaning process, ensuring that the cleaning solution remains effective. This innovation can significantly improve the results, especially when tackling tough, set-in stains.

Moreover, the Bissell 22Q3 also includes specialized tools for upholstery cleaning and pet stain removal, making it an excellent choice for pet owners. These tools are designed to reach difficult areas and effectively lift stubborn dirt and pet hair.

In summary, the Bissell 22Q3 stands out as an exceptional carpet cleaner with its powerful suction, lightweight design, large water tank, and useful specialized tools. With advanced technologies like heatwave technology, users can achieve professional-level cleaning results at home, making this model a reliable addition to any cleaning arsenal. Whether dealing with everyday messes or tough stains, the Bissell 22Q3 is equipped to handle any challenge, ensuring carpets look and feel fresh and rejuvenated.
Top Page Image Contents