Charging the battery

Your Go Vac may be stored in the Charging Base whenever it is not in use. When Go Vac is charging, it may become warm to the touch. This is normal, and no cause for concern. Here are some things to remember about charging:

1.When completely charged, your Go Vac provides over 12 minutes of full cleaning power.

2.When charging for the first time, allow to charge uninterrupted for at least 24 hours. Thereafter, a 12 -16 hour charge will renew the Go Vac battery.

3.Model 3300 features a single red Indicator Light. This light does not go off when the Go Vac is fully charged. Unplugging the Charging Base cord from the wall outlet after 6 - 8 hours will extend the life of the battery.

4.Model 3302 [Fast Charger] features a red and a green Indicator Light. When in charge mode, the red light will glow. When the battery is fully charged and ready for use, the red light will go out and the green light will glow - usually in 3 hours.

IMPORTANT NOTE: If you purchased a 3302 Go Vac unit equipped with the fast charger, you should let the vacuum cool down before placing into the charging base. The charger features a heat sensitive device that will indicate to the vacuum that it is already charged. (Placing the unit while warm, into the vase will take longer to charge.)

5.Decreased operating time may indicate that the battery has built up a charging resistance. To recharge, first completely exhaust the battery, recharge it, then exhaust it again before recharging a second time. This procedure may be required more than once. If your battery still fails to recharge, or does not hold a charge of normal duration, call:

BISSELL Consumer Services 1-800-237-7691

Monday - Friday 8 a.m. — 7 p.m. EST Saturday 9 a.m. — 2 p.m. EST

Or visit our website @ www.bissell.com

NOTE: Charging Bases are not interchangeable between models.

How to use your Go Vac

Your Go Vac is a quick and easy way to clean up around the house, inside the car or truck, or in the workroom.

	Off	On
	1. Release the Go Vac from the	On
	1. Release the Go Vac from the
	Charging Base by lifting it
	straight up and out.
	2. Tip back the Handle into
	typical use position, and
	your Go Vac turns on by
	itself. To turn Go Vac off again,
	return Handle to upright position.

3.To clean stairs, vehicles or small areas, detach the Handle by depressing the button where the bottom of the Handle slides into the Go Vac, and pull the entire Handle assembly out. Use the Go Vac by holding the built-in hand grip.

4.When done, replace the Handle (if detached) and place the Go Vac in the Charging Base. Make certain red charging light is on when Go Vac is in place.

NOTE: For Model 3301, simply remove the Charging Plug from the port at the motor side of the Go Vac, and use as above.

3302, 3301, 3300 specifications

The Bissell 3300, 3302, and 3301 series of carpet cleaners represent a significant advancement in carpet cleaning technology. Designed for both residential and commercial use, these models have become popular among users for their efficiency, portability, and impressive cleaning capabilities.

One of the standout features of these models is their lightweight and compact design. Weighing in at around 13 pounds, these carpet cleaners are easy to maneuver around the house or office, making heavy-duty cleaning less of a chore. The slim profile also allows them to fit into tight spaces, ensuring that no corner is left untouched.

The Bissell 3300 series utilizes a powerful suction mechanism combined with a rotating brush system designed to lift embedded dirt and stains from deep within carpet fibers. This dual-action cleaning process ensures superior performance, effectively removing pet hair, soil, and other stubborn particles. The inject-and-extract technology used in these models delivers a thorough clean by injecting cleaning solution into the carpet fibers while simultaneously extracting dirt, which speeds up the drying time.

Another notable characteristic is the innovative Heatwave Technology used in these models. This technology helps maintain consistent water temperature, ensuring that the cleaning solution remains effective throughout the cleaning process. With this feature, users can expect more efficient cleaning and improved results.

The Bissell 3300, 3302, and 3301 series also come with a variety of specialized tools designed to tackle different cleaning challenges. The included upholstery tool and crevice tool allow for versatile cleaning on furniture, stairs, and in tight areas. Additionally, the models are equipped with a removable water tank, making it easy to fill, empty, and clean without hassle.

Furthermore, these carpet cleaners incorporate Bissell’s patented Smart Mix system, which allows users to adjust the cleaning formula based on their specific cleaning needs. This flexibility ensures that delicate carpets are treated with care while tougher carpets can benefit from a more robust cleaning solution.

With their user-friendly design, effective cleaning technologies, and reliable performance, the Bissell 3300, 3302, and 3301 models are ideal choices for anyone looking to keep their carpets in pristine condition. Whether you're dealing with everyday spills or heavy traffic stains, these carpet cleaners offer the versatility and power needed to get the job done efficiently. In summary, they excel in providing a deep clean, ease of use, and adaptability to various cleaning tasks, making them a valuable addition to any cleaning arsenal.