JVC GR-DV1 manual RM-V708U Remote Control Unit, Installing The Battery, Insert Battery in Holder

17

RM-V708U Remote Control Unit

You can use the RM-V708U to control the camcorder when it’s attached to the Docking Station.

RECORDING START/STOP Button (☞ pg. 60)

PAUSE IN connector (☞ pg. 54)

ZOOM Buttons (☞ pg. 50)

DISPLAY Button (☞ pg. 59)

T W

POWER ON/OFF Button When the camcorder’s Power Dial is set to “PLAY”, you can turn the unit’s power on and off using the RM-V708U.

SHIFT Button (☞ pg. 50)	AUDIO MONITOR
	Button (☞ pg. 59)
SLOW Rewind/Forward	MBR SET Button (☞ pg. 53)
Buttons (☞ pg. 45)	AUDIO DUBBING
LEFT/RIGHT Buttons	Button (☞ pg. 59)
(☞ pg. 50)	DOWN Button (☞ pg. 50)
FADER/WIPE Button
(☞ pg. 54)	INSERT Button (☞ pg. 60)
EFFECT Button
(☞ pg. 51)	UP Button (☞ pg. 50)
EFFECTS ON/OFF	Operation Buttons
Button (☞ pg. 51)
	(☞ pg. 50)
CANCEL Button (☞ pg. 55)	R.A. EDIT Buttons (☞ pg. 54)

Installing The Battery

The RM-V708U uses one lithium battery (CR2025).

1 PULL OUT BATTERY HOLDER Pull out in the direction of the arrow while pressing the lid as shown.

2 INSERT BATTERY IN HOLDER

With the “+” side up, place the lithium battery (CR2025) in the holder.

3 RE-INSERT HOLDER

Slide the holder back in until you hear a click.

KNOB