JVC GR-DV1 manual Playback Sound, Displaying The Time Code During Playback, Viewfinder

49

Playback Sound

During playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. (48 kHz is preset to “FULL SOUND” and 32 kHz is preset to “SOUND 1”.)

RECORDING SOUND	DISPLAY	OUTPUT SOUND
48 KHZz	FULL SOUND	Stereo sound
	SOUND 1	“L” sound is output on both channels
	SOUND 2	“R” sound is output on both channels
32 kHz	FULL SOUND
	SOUND 1	Stereo sound
	SOUND 2

When watching a tape recorded at 48 kHz, if you want to change the output sound, access the Playback Menu and, in step 3 on page 48, select “48kHz MODE” and set it for “FULL SOUND”, “SOUND 1” or “SOUND 2”. When playing back a tape recorded at 32kHz, set in the same manner. For information on output sound during Audio Dubbing, see page 59.

NOTES:

●You can also use the RM-V708U remote control’s AUDIO MONITOR Button to change the output sound (without having to access the Playback Menu). Make sure you point the remote control at the Docking Station’s sensor.

●During playback, the camcorder detects the sound mode in which the recording was made. This detection cannot be made during fast-forward or rewind.

VIEWFINDER

	MINUTES
	SECONDS	DEC. 25 ’ 9 6
12 : 34 : 29	FRAMES*	AM 10 : 3 5

*30 frames = 1 second

Displaying The Time Code During Playback

You can display the Time Code on screen during playback. This is especially useful for editing. This function is preset to “OFF”. To turn it on, select “TIME CODE” at the Playback Menu and change the setting.

ON– The Time Code is displayed on the playback screen.

OFF– The Time Code doesn’t appear.

Displaying the Date During Playback

If the time has been set, the date is automatically recorded separately from the recorded video signal. You can display or remove the date anytime during playback. This function is preset to “ON”. To turn it off, select “DISPLAY” at the Playback Menu and change the setting.

ON– The date is displayed on the playback screen. OFF– The date is not displayed, or is removed.