JVC GR-DV1 manual Exchanging FADE/WIPE Effects, Accessmenu FADER/WIPE Customize, Select NEW Effect

35

T

W

WIDE MODE			O FF		FADER / W IPE CUSTOM I ZE
ZOOM			2 0X
D I S			OFF		1
GA I N		UP	AGC			WH	WH I TE	FADER
TO	FADER / W IPE			MENU	2	BK	BLACK	FADER
TO	P . AE / EFFECT			MENU	3		P D I SSOLVE
TO DAT E / TIME MENU					4		CORNER W I PE
TO SYSTEM MENU					5		W INDOW W I PE
END		I TEM ZOOM SW .					I TEM ZOOM SW .
		SET	SET	BUTTON	END		SET SET BUTTON

RECORDING MENU FADER/WIPE CUSTOMIZE

MENU BUTTON

ZOOM LEVER

SET BUTTON

POWER DIAL

AUTO

FOCUS

EXP.

SET WB

PRO

Exchanging FADE/WIPE EFFECTS

You can replace the 5 effects currently appearing in the menu with 5 others. After exchanging, the new effects appear in the Fader/Wipe Menu.

1 SELECT OPERATION MODE Set the Select Dial to “PRO”.

2 ACCESS RECORDING MENU

Press MENU. The Recording Menu appears in the viewfinder.

3 ACCESSMENU FADER/WIPE CUSTOMIZE

Place the pointer next to “TO FADER/WIPE MENU” by sliding the Zoom Lever, then press SET. The Fader/Wipe Customize Menu appears.

4 SELECT EFFECT TO BE REPLACED Place the pointer next to the number of the effect you want to replace by sliding the Zoom Lever, then press SET. The cursor stops blinking.

5 SELECT NEW EFFECT

Cycle through the remaining effects by sliding the Zoom Lever in either direction, and stop when the one you want is displayed. Press SET.

•The pointer automatically moves to “END”. •To replace other effects, repeat steps 4 and 5.

6 CLOSE MENU

Press SET twice. Selection is complete, and you can use the new effects during recording (☞ pg. 31).