JVC GR-DV1 manual Loading/Unloading a Cassette, Open Cassette Door, INSERT/REMOVE Tape

15

Loading/Unloading A Cassette

If you have already installed a fully charged battery, you can open the door without external power.

CASSETTE HOLDER

CASSETTE COVER

OPEN/EJECT SWITCH

PUSH

Make sure the window side is facing out.

1 OPEN CASSETTE DOOR

Turn on the power, then slide the OPEN/EJECT switch in the direction of the arrow. The cassette cover releases. Open the cover in the direction of the arrow until it locks. The holder opens automatically.

•Do not touch internal components.

2 INSERT/REMOVE TAPE

Insert or remove a tape and press “PUSH” to close the cassette holder.

•Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette cover.

•When the battery's charge is low, you may not be able to close the cover. Do not apply force. Replace the battery with a fully charged one before continuing.

TAPE	RECORDING TIME
DVM 30	Approx. 30 min.
DVM 60	Approx. 60 min.

NOTES:

●It takes a few seconds for the cassette holder to open. Do not apply force.

●If you wait a few seconds and the cassette holder doesn’t open, close the cassette cover and try again.

●Be careful not to get your fingers caught in the holder when it’s closing. If this happens, the holder will open automatically after a few seconds.

●When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before opening the cover.

** To protect valuable recordings . . .

..... slide the black switch on the back of the tape in

the direction of “SAVE”. This prevents this tape from being recorded over. If you decide later that you do want to record on this tape, slide the switch back to “REC” before loading the tape.