JVC GR-DV1 manual TV Playback, Connect Docking Station to TV or VCR, Select TV’S Video Mode

Models: GR-DV1

1 219
Download 219 pages 24.66 Kb
Page 45
Image 45

45

TV Playback

* Please refer to your VCR and/or TV instruction manual(s) when connecting.

NOTES:

If feedback or howling occurs during TV Playback, move the Docking Station so the camcorder’s microphone is away from the TV, or turn down the TV’s volume.

If RECORD/STANDBY (Pause) is engaged for 5 minutes, the Stop mode is automatically activated to protect the heads.

During playback, if the camcorder is left on its side for an extended period, its surface will become very warm. It is recommended that you use the Docking Station (pg. 44) or the CAM Stand (pg. 12) during playback.

 

 

 

 

AC POWER

 

 

 

 

ADAPTER/CHARGER

 

 

 

 

TO DC OUTPUT

 

DC CORD

 

JACK

 

 

 

 

 

 

TO S-VIDEO

 

 

 

INPUT JACK

 

TO DC INPUT

 

When an

 

 

JACK

S-VIDEO

 

 

S-Video jack

 

 

CABLE

 

 

is available.

 

 

 

 

 

 

 

Connect to AV

 

TO S-VIDEO OUTPUT JACK

 

 

jack-equipped

TO AUDIO OUTPUT

TO AUDIO INPUT

TV or to VCR.

 

JACKS (L/R)

JACKS (L/R)

 

 

 

AUDIO and

 

 

VCR (Recording deck)

RED

VIDEO cable

 

RED

 

 

WHITE

TO VIDEO OUTPUT

WHITE

TO VIDEO INPUT JACK

YELLOW

JACK

 

YELLOW

 

 

1 CONNECT DOCKING STATION TO TV OR VCR

Connect as shown in the illustration.

2 TURN ON POWER

Turn on the power to the camcorder and the TV/VCR.

3 SELECT TV’S VIDEO MODE

Set the TV to the channel or mode appropriate for video playback.

If Using A VCR . . . go to step 4.

If not . . . go to step 5.

4 CONNECTINPUT VCR OUTPUT TO TV

Refer to your VCR’s instruction manual.

5 START PLAYBACK

Press PLAY. You can watch the scenes you recorded on the TV.

6 END PLAYBACK

Press STOP and, if you’re not going to continue using the camcorder, set the Power Dial to “OFF”.

NOTES:

If, when using an S-Video cable, there’s no picture, connect the camcorder’s output to the regular video input on the TV or VCR and try again.

To change from normal to slow-motion playback, press PAUSE, then point the remote control at the Docking Station and press SLOW. After playing back in slow motion for about 20 seconds, normal playback resumes. To stop slow-motion playback in progress, press PLAY.

During slow-motion playback, due to digital image processing, the picture may take on a mosaic effect.

Page 45
Image 45
JVC GR-DV1 manual TV Playback, Connect Docking Station to TV or VCR, Select TV’S Video Mode, END Playback