JVC GR-DV1 Installing The Battery Pack, Open Battery Cover, Insert Battery, Close Battery Cover

NOTES:

●If you connect the camcorder’s DC cord to the adapter during battery charging, power is supplied to the camcorder and charging stops.

●When using the AC Power Adapter/Charger, be sure to use the supplied power cord only.

●The AC Power Adapter/Charger is for use with the BN-V712U Battery Pack only.

●When charging the Battery Pack for the first time or after a long storage period, the Charge Indicator may not light. In this case, remove the Battery Pack from the AC Power Adapter/Charger, then try charging again.

●Since the AC Power Adapter/Charger processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas.

●Be sure to securely connect the power cord to the AC Power Adapter/Charger.

●Before connecting to an AC outlet, connect the power cord to the AC Power Adapter/Charger. If you plug into an AC outlet first and the power cord’s terminal comes in contact with a metal surface or object, there is the possibility of a short circuit or fire.

** Charging Environment

Perform charging where the temperature is between 10° and 30°C. (20°–25°C is the ideal temperature range for charging.) If the environment is too cold, charging may be incomplete.

Continuous Shooting

Continuous shooting is possible for approximately

30 minutes, under the following conditions:

•A BN-V712U Battery Pack is in use

•The temperature is approximately 20°C/68°F

However, . . .

•If the temperature is below 10°C/50°F, or

•If Zoom or RECORD/STANDBY are engaged repeatedly, continuous shooting capability is reduced significantly. Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.

11

Installing The Battery Pack

The battery pack does not charge while in the camcorder. Before installation, make sure the battery pack has been charged fully.

BATTERY COVER

BATTERY

1 OPEN BATTERY COVER

Move the cover in the direction of the arrow.

2 INSERT BATTERY

Remove its protective cap and insert the + – end of the battery first.

3 CLOSE BATTERY COVER

NOTE:

To remove a discharged battery pack, simply open the cover and slide the battery pack out.