JVC GR-DV1 manual EDI Ting, Random Assemble Editing, Start Source Playback, Execute FADE/WIPE

54

EDITING(Cont.)

Random Assemble Editing

Using the RM-V708U remote control, you can use P.AE/Effects and make an original edited tape.

SOURCE TAPE (Camcorder)

NEW TAPE (VCR)

	TO REMOTE PAUSE
TO EDITING JACK	JACK
	EDITING CABLE

T W

	TO S-VIDEO	TO S-VIDEO		RM-V708U
	OUTPUT JACK	INPUT JACK
	S-VIDEO CABLE
			TO AUDIO
TO AUDIO OUTPUT JACKS (L/R)			INPUT JACKS (L/R)
RED	AUDIO and VIDEO cable		RED
WHITE			WHITE
YELLOW			YELLOW
TO VIDEO OUTPUT JACK		TO VIDEO INPUT JACK

VCR (Recording deck)

1 MAKE CONNECTIONS

Connect the Docking Station to your VCR and make sure that the playback picture and sound are available on the connected TV (☞ pg. 45).

NOTES:

●When using a JVC VCR with a remote pause terminal, connect the editing jack on the Docking Station to the VCR’s remote pause terminal using an editing cable.

●If the VCR has an S-Video input terminal, connect it using an S-Video cable.

●If the VCR has only one audio input terminal, connect it using a conversion plug.

To Operate The VCR With The Remote Control . . .

..... press and hold SHIFT, then press the

appropriate control button.

2 START SOURCE PLAYBACK

Press PLAY and then press R.A. EDIT ON/OFF on the remote control. Make sure to point the remote control at the Docking Station's sensor.

•The Random Assemble Editing Menu appears on the TV screen.

•If you're not using a Fade/Wipe at the PROGRAM 1 Edit-In point, go to step 4.

3 EXECUTE FADE/WIPE IN

Press FADER/WIPE.

•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

•You can’t use a Picture Wipe/Dissolve at the beginning of Program 1, or at the end of the last scene.