Bissell 1697 warranty Cap Rotor Filter, Remove the black brush arm that holds the brush in place

Page 12
8. Remove the “toothed” brush belt from the brush then from the red pump pulley. Set the “toothed” brush belt and brush aside.
Pump Belt and Brush Belt Replacement
1. Turn the machine off and unplug from wall outlet.
2. Step on the release pedal and recline the handle down onto floor. (see illustration).
3. Remove the Tank-in-Tank and SmartMix tanks. Set them aside (see illustration).
4. Remove Belt Access Door located near the Floor Cleaning/ Tools switch by inserting a flat head screwdriver into the slot nearest to the handle and gently prying the access door off (see illustration).
5. Turn the machine onto its side so the belt access area is facing upward (see illustration).
6. On the bottom of the machine, near the belt access area, is a red retainer plate that holds the black brush arm and brush in place. Using a Phillips head screwdriver remove the screw that holds the red retainer plate in place. Set red retainer plate and Phillips head screw aside (see illustration).
Store cleaner upright in a protected, dry area.
8.
9.
10. When carpet is dry, vacuum again to remove hair and fuzz that the POWERSTEAMER may have loosened.
Wipe all exterior surfaces with a soft cloth.
Note: SmartMix tank may be stored with concentrate ready for your next cleaning job. Make sure dial is set to Water Only
Rinse out the Tank-in-Tank and replace on the machine.
Remove Tank-in-Tank, dispose of dirty water.
4. Coil flex hose around storage brackets on tool caddy.
5.
6.
7. Clean out the Flow Indicator Filter each time it is used to insure best cleaning performance. Unscrew the Flow Indicator Cap, lift out the red Rotor and white Filter. Rinse all three parts in tap water. Replace the Filter and Rotor. Replace the Flow Indicator Cap; turn until snug, do not over-tighten.
Maintenance/Storage
1. Turn Power switch OFF.
2. Unplug power cord from the outlet and coil around Power Cord Quick Release.
3. Remove and rinse tools in clean, running water, let dry and replace in tool caddy.

Tip:

SmartMix tank may be stored with concentrate ready for your next cleaning job. Make sure dial is set to Water Only.

Set

dial to:

Cap Rotor

Filter

CAUTION:

PowerSteamer Pro uses water and must not be stored where there is a danger of freezing. Freezing will damage internal components and void the warranty.

23 Tank- in-Tank

3

5

7. Remove the black brush arm that holds the brush in place.

SmartMix®

4

6

Set the black brush arm aside (see illustration).

9.Locate and remove the broken pump belt.

WARNING:

7

8

9

 

To reduce the risk of fire, electric shock or injury,

12

unplug appliance from outlet before servicing.

 

ug310-5921_1697_105.indd 12

2/2/05 10:58:44 AM

Page 11 Page 13
Image 12
Page 11 Page 13
Contents PowerSteamer Pro Series Thanks For Buying a Bissell PowerSteamer PRO Deep Cleaner Important Safety Instructions Grounded Outlets Grounding PinProduct View How To Assemble SmartMixSlide Upper Handle onto Lower Handle Align Upper Handle holes and Tool Caddy holesDirtLifter PowerBrush Choose the SmartMix setting that fits the cleaning jobTank-in-Tank Carry it like a bucket to fill at the sinkEmptying Tank-in-Tank Remove the Tank-in-Tank follow steps 1 Pour OutCarry the Tank-in-Tank, like a bucket, to the sink where You will dispose of the dirty waterHow To Clean Carpet Flow IndicatorReadyTools Dial Normal Cleaning Plug into a proper outlet and turn the Power switch onMachine Preparation Pre-Treating OptionalCleaning Fluid Section Cleaning TechniqueImportant Check Upholstery Tags Tilt Handle Back Handle Release Carrying Cap Rotor Filter Remove the black brush arm that holds the brush in placeTroubleshooting To Install The Replacement Pump BeltRe-install the brush into the base of the unit Assembly is now completeReduced Spray Or No Spray Poor tool position. Handheld attachments onlyBissell Consumer Services Replacement PartsTank Assembly Complete Replacement Brush BeltLimited One Year Warranty About Your Warranty

1697 specifications

The Bissell 1697, known as the SpotBot Pet, is a highly effective portable carpet and upholstery cleaner designed specifically for pet owners. This compact and versatile cleaner boasts a range of features, technologies, and characteristics that make it an essential tool for maintaining a clean home, especially in households with pets.

One of the standout features of the Bissell 1697 is its hands-free cleaning capability. The SpotBot is equipped with an automatic cleaning cycle that allows users to set it on a stain and let it do the work. With two preset cleaning cycles, users can choose between a 3-minute or a 6-minute cleaning option, depending on the severity of the stain. This is particularly beneficial for busy pet owners who may not have the time to clean manually.

The SpotBot uses Bissell’s patented Deep Reach Technology, which ensures that the cleaning solution penetrates deep into the carpet fibers. This technology effectively lifts and removes pet stains and odors, leaving surfaces fresh and clean. The combination of a powerful suction motor and specially-designed brushes enhances the cleaning performance, making it a formidable opponent to stubborn pet messes.

Equipped with a built-in clean tank and an easy-to-empty dirty tank, the Bissell 1697 simplifies the cleaning process. The clean tank holds the formula, while the dirty tank collects the extracted dirt and grime. This separation allows for efficient and hassle-free cleaning, so users can easily maintain the machine.

The SpotBot features a unique spiral brushing action that provides an effective scrub while being gentle on fabrics. This design prevents damage to carpets and upholstery, making it safe for a variety of surfaces. The lightweight design ensures portability, allowing users to easily carry the Bissell 1697 from room to room or even up and down stairs.

Additionally, the Bissell SpotBot Pet comes with a variety of cleaning solutions specifically formulated for pet owners, including the Pet Stain & Odor formula. These solutions work hand-in-hand with the machine to ensure a thorough clean while neutralizing any stubborn odors that may linger after a mess is removed.

In summary, the Bissell 1697 SpotBot Pet is a powerful and convenient solution for pet owners looking to tackle messes quickly and efficiently. With its hands-free operation, Deep Reach Technology, lightweight design, and specialized cleaning solutions, this portable cleaner offers everything needed to keep homes looking pristine, no matter how many furry friends reside within.
Top Page Image Contents