Bissell 1672 warranty Putting It Away After Deep Cleaning/Wet Vacuuming, After Dry Vacuuming

Putting It Away

After Deep Cleaning/Wet Vacuuming

					Rinse filling cavity with clean water. Leave about 1/2
	1.
					gallon of clean water in filling cavity.
					Hold floor nozzle over bucket or sink.
			2.
					Turn on pump/spray switch, pull trigger for 30 seconds,
			3.
					and empty power unit.
					Empty filling cavity of excess water.
		4.
					Drain solution hoses.
	5.
					Empty and rinse collection tank.
	6.
					Rinse and dry collection tank, ball cage, ball, wands,
				7.
					and tools.
					Remove tank siphon tube from opening on power unit.
				8.
					Remove filter from end of tank siphon tube, clean filter
			9.
					under running water, then replace filter in end of tank
					siphon tube.
10.					Replace tank siphon tube in opening in power unit.
11.					We recommend that you air dry before closing unit
					for storage.

After Dry Vacuuming

Remove motor filter from top power unit and rinse with

1. water. Squeeze to remove water, then air dry before reinstalling. Clean after each vacuuming.

Remove dry filter bag from ball cage. Shake to remove

2. surface dirt. Rinse bag by hand in warm water. Air dry before reinstalling.

12

Tank siphon tube filter

Tip:

Always clean floor nozzle spray tip and tank siphon tube filter before storing appliance.