Clarion Comprehensive Guide to VRX935VD Functions and Features

Other Functions

Always turning on the button illumination on the operation panel

Notes:

•The following operation is enabled when the panel is open.

•Doing this operation turns on and off the illunination only for the buttons of VOL [+] and [–], [DISP], and [OPEN].

The button illumination on the operation panel when the display is turned upward, can be switched between “ON” and “OFF”.

The factory default setting is ON.

●“OFF”: Button illumination on the operation panel turns on for 5 seconds;

●“ON”: Button illumination is always on when the power is turned on;

1.When the panel is open, press the [ADJ] button to show the ADJUST MODE menu.

2.Touch the [ ] key to select “UPPER ILLUMI”.

3.Touch the [UPPER ILLUMI] key to select “ON” or “OFF”.

4.Touch the [ON] or [OFF] key for setting.

5.Press the [ADJ] button or touch the [RTN] key to return to the previous mode.

∗ To set “ON” again, switch “OFF” to “ON” manually.

Entering titles

Titles up to 10 characters long can be stored in memory and displayed for Radio stations, TV stations and CD changer. The numbers of titles that can be entered for each mode are as follows.

Mode	Number of titles
TUNER mode	30 titles
TV mode	15 titles
CD changer mode	Number of titles
CDC655z connected	60 titles
CDC655Tz connected	100 titles
CDC1255z connected	50 titles
DCZ625 connected	100 titles

∗You cannot enter titles with the unit in Seek, Preset Scan, Auto store (TUNER or TV) mode. Cancel each of those operations before entering titles.

1.Press the [FUNC] button to select the mode you want to enter a title (TUNER, CD changer or TV).

2.Select and play a CD in the CD changer or tune in to a Radio station or a TV station for which you want to enter the title.

3.Touch the screen or press the [LIST] button, the MENU screen appears.

4.Touch the [TITLE INPUT] key in the MENU screen.

The title input mode display appears.

5.Touch the characters, symbols, etc. shown in the display to input titles.

“ ” : Centering

“BS” : Backspace

“ ” : Space

“MEMO” : Memory

“z(w)” : Scroll

Notes:

•Up to 10 characters can be input.

•To switch the character types, touch the scroll key (z) at the lower left of the display.

6.Repeat the step 4 to enter the complete title.

7.Touch the [MEMO] key for 2 seconds or longer to store the title into memory and cancel title input mode.

Title list play

You can display a list of titles, then select the disc or broadcast station to listen to from that list.

∗You can not display a title list with the unit in Seek, Preset Scan, Auto store (Tuner or TV) mode. Cancel those operation modes before to display a title list.

1.With the unit in radio, CD/MD changer or TV mode, touch the [P. CH SELECT], [DISC SELECT] key. A title list is displayed. The following functions can be carried out in a title list display.

●TUNER: A title of a station stored in the presets 1 to 6 or frequency is displayed;

●CD/MD changer: DISC titles for discs 1 to 6 are displayed (By changing over a display page in case of 12-CD changer, disc 7 to 12 can be displayed). When there is not any disc in a changer, “NO DISC” is displayed.

●TV: A title of a channel stored in the presets 1 to 6 or a channel number is displayed.

2.Touch the [DIRECT] key (1 to 6) to select one of the items 1 to 6 and reproduce the selected broadcast station or disc.

∗ In case of 12-CD changer, touch the [DISC SELECT] key to change over to a list display of discs 7 to 12.

3.Touch the [RTN] key again to return to the previous mode.

VRX935VD 53

English

Owner’s manual