5.1ch Surround Decoder Operations
English
Owner’s manual
●PL II Control
∗This function is available only when the MUSIC MODE is selected for Dolby PL II. For setup details, see “Selecting the Dolby PL II (Dolby Pro Logic II) type.”
[PANORAMA]:
Touch the [ON] or [OFF] key. “OFF” is the default value.
[DIMENSION]:
Touch the [w] or [z] key to make adjustments between 0 and 6. The default value is “3”.
[CENTER WIDTH]:
Touch the [w] or [z] key to make adjustments between 0 and 7. The default value is “3”.
●FILTER
This function is used to select filter frequencies that suit the speakers that are used.
∗This function is not available for speakers whose “SPEAKER SEL” setting is set to OFF.
[FRONT HPF]:
This function can be set to the following four settings: 50 Hz, 80 Hz, 120 Hz or THROUGH. “THROUGH” is the default value.
[CENTER HPF]:
This function can be set to the following three settings: 50 Hz, 80 Hz and 120 Hz. “120 Hz” is the default value.
●SPEAKER GAIN
This function sets speaker output level.
∗This function is not available for speakers whose “SPEAKER SEL” setting is set to OFF.
[FRONT R], [SURROUND R],
[SURROUND L] or [SUB WOOFER] key to set respective item.
●DELAY
This function adjusts the timing of the speakers so that they are synchronized with front speaker output.
∗This function is not available for speakers whose “SPEAKER SEL” setting is set to OFF.
[CENTER SP]:
Adjustments are made in the range 0 ms to 5 ms. The default value is “0 ms”.
[SURROUND SP]:
Adjustments are made in the range 0 ms to 15 ms. The default value is “0 ms”.
●DOLBY D
This function sets the dynamic range compression.
∗This function is not available for speakers whose “SPEAKER SEL” setting is set to OFF.
∗The default value is “MAX”.
[SURROUND HPF]:
This function can be set to the following four settings: 50 Hz, 80 Hz, 120 Hz or THROUGH. “THROUGH” is the default value.
[SUB WOOFER LPF]:
This function can be set to the following three settings: 50 Hz, 80 Hz and 120 Hz. “120 Hz” is the default value.
4.When all settings are completed, press the [ADJ] button or touch the [RTN] key to return to the previous mode.
56 VRX935VD