Clarion VRX935VD Other Functions Setting the auto dimmer Setting the beep, Clock Adjustment

English

Other Functions

Setting the auto dimmer Setting the beep

Owner’s

The brightness of the color LCD display is adjusted automatically in proportion to the surrounding light. The auto dimmer function can switch between ON and OFF.

ON :Auto dimmer function is set.

OFF :Auto dimmer function is cancelled.

∗The sound heard when you make operations is called “beep”. The unit can be set up so that it does not produce this beep sound.

∗The factory default is “BEEP ON”.

1.When the panel is open, press the [ADJ] button to select the ADJUST MODE menu.

manual

∗The factory default setting is “ON”.

1.Press the [ADJ] button to display the ADJUST MODE menu.

2.Touch the [AUTO DIMMER] key to select “ON” or “OFF”.

3.Touch the [ON] or [OFF] key for setting.

4.Press the [ADJ] button or touch the [RTN] key to return to the previous mode.

2.Touch the [ ] key to select “BEEP”. Touch the [BEEP] key to select “ON” and “OFF”.

3.Touch the [ON] or [OFF] key to select a desired mode and set it.

4.Press the [ADJ] button again or touch the [RTN] key, The unit returns to the previous mode.

Adjusting the dimmer level

You can adjust the reduced illumination level of the dimmer. When driving at night with the inside of the car, the auto dimmer function can reduce the display illumination linked “to the illumination power supply of the car” in this unit in order to prevent glare from the display.

∗This function is enabled only when the auto dimmer function is set up to “OFF”.

●The factory default:

When the car light is off: Brightest setting

When the car light is on: Medium brightness

1.When the panel is open, press the [ADJ] button to display the ADJUST MODE menu.

2.Touch the [DIMMER LEVEL] key to adjust the dimmer level.

3.Touch the [+] or [–] key to adjust.

4.Press the [ADJ] button again or touch the [RTN] key two times.

The unit returns to the previous mode.

Setting the button illumination

∗The factory default setting is “GREEN” (green).

1.When the panel is open, press the [ADJ] button to select the ADJUST MODE menu.

2.Touch the [ ] key to select “KEY ILLUMI”.

3.Touch the [KEY ILLUMI] key to select “RED” (red) or “GREEN” (green).

4.Touch the [RED] or [GREEN] key to select a desired mode and set it.

5.Press the [ADJ] button again or touch the [RTN] key. The unit returns to the previous mode.

Setting the motion and sprite pattern speed

∗The factory default setting is “HIGH” (high).

1.When the panel is open, press the [ADJ] button to select the ADJUST MODE menu.

2.Touch the [MOTION SENS] key to select

“HIGH” (high) or “MID” (mid) or “LOW” (low).

3.Touch the [HIGH] or [MID] or [LOW] key to select a desired mode and set it.

4.Press the [ADJ] button again or touch the [RTN] key. The unit returns to the previous mode.

Clock Adjustment

1.When the panel is open, press the [ADJ] button to select the ADJUST MODE menu.

2.Touch the [ ] key to select “CLOCK”. Touch the [CLOCK] key to adjust the time.

3.Touch the [w],[z],[a.m] or [p.m] key to adjust the time.

∗ The time is displayed in 12-hour format.

4.Press the [ADJ] button again or touch the

[RTN] key two times. The unit returns to the previous mode.

54 VRX935VD