English
Owner’s manual
5.1ch Surround Decoder Operations
Setting and storing P.EQ Properties | Selecting the Dolby PLII (Dolby Pro | |||
1. | Press the | Logic II) type | ||
| MODE menu. | 1. | Press the | |
2. | Touch the [P.EQ] key to show the P.EQ | |||
| PLII] key. | |||
| adjusting display. | 2. | Touch the key for the desirable type to select | |
3. | Touch the key for the desirable type to select it. | |||
| it. | |||
| The P.EQ adjustment contents are as | 3. | When the setting is finished, touch the [RTN] | |
| follows: |
| key or press the | |
| ●SIGNAL |
| previous mode. | |
| ∗ The factory default setting is “P.NOISE”. |
| ∗ The factory default is “off”. |
This function selects [P. NOISE] or [MUSIC].
●SPEAKER SELECT
∗The factory default setting is “FRONT”.
This function selects [FRONT], [CENTER] or [SURROUND].
●“BAND”
∗The factory default setting is “BAND1”.
Select the channel to be compensated (BAND1, BAND2, BAND3).
●“FREQUENCY”
∗The factory default setting is “1 kHz”.
Select the center frequency that you want to compensate from the range of 20 Hz to 20 kHz. (1/3 octave step, 31 points)
●“Q”
∗The factory default setting is “1”.
Set the sharpness of the
●“GAIN”
∗The factory default setting is “0”.
Adjust the gain (output level) in the range of - 12 dB to +12 dB. (1 dB step, 25 points)
4.After making adjustments to a desired pattern by repeating the operations of item3, touch the [RNT] key or press the
58 VRX935VD