Clarion VRX935VD Adjusting the MID, Adjusting the Beat EQ, Adjusting the TREBLE, Basic Operations

Basic Operations

English

Owner’s manual

Adjusting the MID

The MID gain, MID frequency (center frequency) and MID Q can be adjusted as follows.

1.Press the [A-M] button, then touch the [USER CUSTOM] key.

2.Touch the [DETAIL] key, then touch the [MID] key.

3.When the bass type selection screen is displayed, touch the key for the desirable type to select it.

4.Touch the [w] or [z] key to adjust to desirable level.

GAIN : –6 to 6 (The factory default setting is “0”)

FREQ. : 700Hz/1kHz/2kHz (The factory default setting is “1k”)

Q: 1.5/2 (The factory default setting is “2”)

5.When the adjustment is complete, touch the [RTN] key several times or press the [A-M] button to return to the previous mode.

∗The factory default setting is “0”. (Adjustment range: front 13 to rear 13)

[w] key: Emphasized the sound from the front speakers.

[z] key: Emphasized the sound from the rear speakers.

4.Touch the [Å] or [Î] key to adjust to the balance level.

∗The factory default setting is “0”. (Adjustment range: left 12 to right 12)

[Å] key : Emphasized the sound from the left speakers.

[Î] key : Emphasized the sound from the right speakers.

5.When the adjustment is complete, touch the [RTN] key several times or press the [A-M] button to return to the previous mode.

Adjusting the Beat EQ

1.Press the [A-M] button and select “BASS BOOST or IMPACT or EXCITE”.

2.Touch the [DETAIL] or [LEVEL] key to display the level adjustment screen.

Adjusting the TREBLE

The treble gain and treble frequency (center frequency) can be adjusted as follows.

1.Press the [A-M] button, then touch the [USER CUSTOM] key.

2.Touch the [DETAIL] key, then touch the [TREBLE] key.

3.When the bass type selection screen is displayed, touch the key for the desirable type to select it.

3.Touch the [w] or [z] key to adjust to desirable level.

∗When BASS BOOST is selected, you can adjust the bass in the range of –3 to 3.

∗When IMPACT and EXCITE is selected, you can adjust the bass and treble in the range of – 3 to 3.

4.When the adjustment is complete, touch the [RTN] key several times or press the [A-M] button to return to the previous mode.

4.Touch the [w] or [z] key to adjust to desirable level.

GAIN : –6 to 6 (The factory default setting is “0”)

FREQ. : 8kHz/12kHz (The Factory default setting is “12K”)

5.When the adjustment is complete, touch the [RTN] key several times or press the [A-M] button to return to the previous mode.

Adjusting the balance/fader

1.Press the [A-M] button, then touch the [DETAIL] key.

2.Touch the [BAL/FAD] key.

3.Touch the [w] or [z] key to adjust to the fader level.

Turning on/off the loudness

The loudness effect emphasizes the bass to create a natural sound tone. When you are listening to music at a low volume, it is recommended to use the loudness effect.

1.Press and hold the [A-M] button for 1 second or longer to turn on the loudness effect. When the loudness effect is turned on, “LD” lights in the display.

2.Press and hold the [A-M] button for 1 second or longer to turn off the loudness effect. “LD” goes off in the display.

24 VRX935VD