Purple/Black
2
Purple
1
Green/Black | 8 |
| |
Blue/White | 0 |
| |
Green | 7 |
| |
Brawn | *∗1 |
| |
Glay | 3 |
| |
) | |
| |
Glay/Black | 4 |
| |
Orange/White | ! |
| |
White/Black | 6 |
| |
Red | @ |
| |
White | 5 |
| |
Yellow | 9 |
| |
( |
|
Black | # |
| |
Blue | ¡ |
|
English connectionmanual Installationand Wire
No. | Description |
1 | REAR RIGHT+ |
2 | REAR RIGHT- |
3 | FRONT RIGHT+ |
4 | FRONT RIGHT- |
5 | FRONT LEFT+ |
6 | FRONT LEFT- |
7 | REAR LEFT+ |
8 | REAR LEFT- |
9 | +12 V MAIN POWER |
0 | Amplifier |
! | ILLUMINATION |
@ | +12 V ACCESSORY |
# | GROUND |
$ | CCD camera |
% | VISUAL 2 terminal |
¥ | Radio antenna jack (∗2) |
& | CeNET terminal |
* | Phone mute (Brown) (∗1) |
( | Spare terminal (Yellow) |
) | Parking brake |
¡ | AUTO ANTENNA |
∗1: Connecting the PHONE MUTE Terminal
The lead included with the unit must be connected to the specified position of the vehicle’s connector in order to use the “triggered audio mute for cellular telephones” function.
∗2: Use the attached extension lead when necessary. (Provided with this unit)
Note : Before making any installation, disconnect the car battery - (negative) cable.
∗3: If a 5.1ch Surround Decoder (DVH920, sold separately) is connected and the amp of this unit is used, set the select switch to “LINE IN”. Then the AUDIO OUT (IN) terminal of the Tuner Amp Unit is only available for audio input, not outputting the audio.
(LINE IN) D | N (LINE OUT) | ||
|
|
|
|
∗4: Connect to a separately sold external amplifier with a separately sold RCA cord (L, R).
Note : When the 5.1ch Surround Decoder is connected, these terminals are only available for audio input.
∗5: Connect to a Rear View Monitor (sold separately) for the rear seat.
∗6: Connect to separately sold VTR equipment with a separately sold connection cord.
VRX935VD 69
