Basic Operations
Changing the setting of the display background
WARNING
Perform the setting of this function only when the car is stopped and the parking brake is applied.
1.Press the [DISP] button for 1 second or longer to show the background setup menu.
∗This menu appears only during Radio and DVD (with CD, MP3), CD/MD changer mode, and when the car is moving.
2.Touch the setting key to show the setup display.
●To set up the motion pattern
●To set up the sprite pattern
●To set up the wall color
3.Press the [DISP] button again or touch the [RTN] key to return to the STANDARD screen.
Radio Operations
FM reception
For enhanced FM performance the 
® tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits.
Changing the reception area
This unit is initially set to USA frequency intervals of 10kHz for AM and 200kHz for FM. When using it outside the USA, the frequency reception range can be switched to the intervals of 9 kHz for AM and 50 kHz for FM.
●Setting the reception area
1.While pressing [DISP] button, each time you press and hold the number “6” of the [DIRECT] buttons for 2 seconds or longer, the reception area switches from inside the USA to outside the USA or from outside the USA to inside the USA.
∗Any station preset memories are lost when the reception area is changed.
Listening to the radio
1.Press the [FUNC] button and select the RADIO mode. The frequency is displayed.
2.Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3.Press the [a] or [d] button to tune in the desired station.
∗When the panel is open, the same operation is also available by using the [a] or [d] button in the panel.
English
Owner’s manual
VRX935VD 25
