5.1ch Surround Decoder Operations
Output adjustment of subwoofer | DSF mode | |
volume, center volume and balance/ |
| |
DSF effect ON/OFF | ||
fader | ||
∗ The factory default setting is “OFF”. | ||
1. Press the | ||
1. Press the | ||
[DETAIL] key. | ||
2. Touch the [STATUS] key. | ||
2. To make an adjustment on : | ||
|
English
Owner’s
●Subwoofer volume adjustment
∗The factory default setting is “0”. (Setting range :
●Center volume adjustment
∗The factory default is “0”. (Setting range :
●Balance/Fader adjustment
Touch the [w] or [z] key to adjust the balance level.
[w] key: emphasized the sound from the front speakers.
[z] key: emphasized the sound from the rear speakers.
[Å] key : emphasized the sound from the left speakers.
[Î] key : emphasized the sound from the right speakers.
3.When the adjustment is complete, touch the [RTN] key or press the
3.Touch the [DSF] key to select “on” and “off”.
4.Each time the [ON/OFF] key is touched, the on and off statuses are switched alternately.
5.After the setting, press the
Note:
•If the DSF effect is set to OFF, the adjustment made in “DSF” is not reflected in the music source.
Selecting the DSF type
1.Press the
2.Touch the key for the desirable type to select it.
3.When the setting is finished, touch the [RTN] key or press the
P.EQ mode
P.EQ effect ON/OFF
∗The factory default setting is “OFF”. 1. Press the
2.Touch the [STATUS] key.
3.Touch the [P.EQ] key to select “on” and “off”.
4.Each time the [ON/OFF] key is touched, the on and off statuses are switched alternately.
5.After the setting, press the
Note:
•If the P.EQ effect is set to OFF, the adjustment made in “P.EQ” is not reflected in the music source.
manual
VRX935VD 57