Clarion VRX935VD VISUAL Operations, Changing over monitor display size, Monitoring the CCD camera

English

VISUAL Operations

Changing over monitor display size Monitoring the CCD camera

Owner’s manual

∗This function is available only when the panel is open.

Notes:

•This function is not available while you are driving.

•Switch to the VISUAL/DVD player(DVD video or video CD)/DVD changer/TV mode you see.

The CCD camera can be connected to this unit. For the power supply of the camera, mount the power box sold separately (CAA-188).

Note:

•This function is not available when the display is stored.

1.Press the [DISP] button for 1 second or longer to change over the monitor display size. Each time you press the [DISP] button, the monitor display size changes in the following order:

“NORMAL” ➜ “WIDE” ➜ “F. WIDE” ➜ “CINEMA” ➜ “NORMAL”

●“NORMAL”: (normal display)

There is a black area at both right and left ends of a display. In case of normal TV broadcasting (4:3), the image can be shown without being cut or deformed.

●“WIDE”: (wide mode)

The image at right and left ends in a display elongates horizontally.

●“F. WIDE”: (full wide mode)

The whole image elongates horizontally.

●“CINEMA”: (cinema mode)

The image at both top and bottom in a display disappears.

Notes:

•When a normal 4:3 size image, not being a wide one, is viewed by displaying it fully on a wide monitor display in a wide mode or a full-wide mode, a part of the peripheral image will be lacking or deformed. In deference to the intention of producer, an original image can be viewed in a normal mode.

•During superimposed display, it becomes a full- wide mode.

•When the monitor display size mode is changed, only the monitor display size indication superimposed on the screen (“NORMAL”, “WIDE”, “F.WIDE” or “CINEMA”) will be changed, then the corresponding display size mode will be engaged.

Switching the 2-ZONE/3-ZONE

The front monitor lock and rear monitor lock allows you to enjoy 2-ZONE and 3-ZONE.

2-ZONE:

Use the front monitor lock (or rear monitor lock) to lock the receiver screen image (or image from a separately sold rear monitor) to switch the speaker sound to a sound mode that differs from the sound accompanying the image.

3-ZONE

When a separately sold rear monitor is connected, use the front or rear monitor lock to lock the image of the receiver and that of the rear monitor and to switch the speaker sound to a sound mode that differs from the sound accompanying the image.

Notes:

•The front monitor lock displays the image of an external device (VTR, TV game console, etc.) connected to the Visual 2 terminal.

•The rear monitor lock displays the image of an external device (VTR, TV game console, etc.) connected to the Visual 1 terminal.

•When a DVD changer connected to the CeNET is connected to the Visual 1 terminal, the rear monitor lock cannot be used.

•When 2-ZONE or 3-ZONE is used, the sound from an external device (VTR, TV game console, etc.) can only be heard from headphones connected to the external device.

•A rear monitor is a separately sold accessory.

44 VRX935VD