English connectionmanual Installationand Wire
3. GENERAL CAUTIONS
1. Do not open the case. There are no user ser- | 2. Use a soft, dry cloth to clean the case. Never |
viceable parts inside. If you drop anything | use a rough cloth, thinner, benzine, or alco- |
into the unit during installation, consult your | hol, etc. For tough dirt, apply a little cold or |
dealer or an authorized Clarion service cen- | warm water to a soft cloth and wipe off the |
tre. | dirt gently. |
4. CAUTIONS ON INSTALLATION
1.Prepare all articles necessary for installing the main unit before starting.
2.This model is used with the LCD panel slid forwards (shell loading system). On some types of cars, the LCD panel may touch the dashboard or shift lever, in which case it can- not be installed. Check that the set will not hamper operation of the shift lever before choosing the place of installation.(Figure 2)
Dashboard
5.Use the enclosed screws for installation. Us- ing other screws can cause damage. (Figure 4)
ChassisChassis
Damage
Max. 8 mm (M5 screw)
Shift lever | Shift lever |
| |
(check that it does not |
|
touch the LCD.) |
|
Figure 2
3.Install the unit within 30° of the horizontal plane. (Figure 3)
Figure 4
6.The source unit has mounting screw holes for NISSAN (N marks) and TOYOTA (T marks) vehicles.
T N T
NT N
Figure 5
Max. 30˚
Figure 3
4.If you have to do any work on the car body, such as drilling holes, consult your car dealer beforehand.
64 VRX935VD
