MAKING MINOR ADJUSTMENTS BETWEEN DOORS
Remember, a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the Refrigerator.
When the left door is lower than the right door.
Adjustment part
When you turn the hex wrench counter-
clockwise ( 
), the door will move up.
Only the
1.After adjusting the doors, please insert the supplied fastener ( 5 ) using Pliers ( 6 ) in the gap between the
When the left door is higher than the right door.
Adjustment part
2 fastener are enclosed with the refrigerator.
The thickness of each fastener is 1.0mm.
1.Pull out the freezer drawer ( 1 ), then you can see the middle hinge ( 2 ) .
2.Insert the supplied hex wrench ( 3 ) into the shaft ( 4 ) of the middle hinge.
3.Please adjust the height by turning the hex
wrench ( 3 ) clockwise ( 
) or counter-
clockwise ( 
).
2
3
4
1
3
14_ setting up
2011.7.4 9:22:10 PM |
