Samsung RF62HEVB1/BWT manual Setting up your freezer, Getting Ready to Install the Refrigerator

setting up your freezer

GETTING READY TO INSTALL THE REFRIGERATOR

Congratulations on your purchase of this Samsung Refrigerator. We hope you enjoy the state-of-art features and effi ciencies that this new appliance offers.

Selecting the best location for the Refrigerator

150mm150mm

100mm 100mm 100mm 100mm

•A location with easy access to the water supply.

•A location without direct exposure to sunlight.

•A location with level (or nearly level) fl ooring.

•A location with enough space for the Refrigerator doors to open easily.

•Allow suffi cient space to the right, left, back and top for air circulation. If the Refrigerator does not have enough space, the internal cooling system may not work properly.

•Please ensure that appliance can be moved freely in the event of maintenance & service.

First thing! Make sure that you can easily move your Refrigerator to its fi nal location by measuring doorways (both width and height), thresholds, ceilings, stairways, etc.

817mm	817mm	817mm
RF62* : 1172mm	665mm	RF62*:1455mm
	RF62* : 1125mm
RF67* : 1222mm	RF67* : 1175mm	RF67*:1505mm
1492mm	1492mm

Drawer-TypeSwing-Type

• Allow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower.

•If you install the Refrigerator where is below 10ºC, it may not function in optimum level.

•Do not locate the refrigerator where the wet condition.

06_ setting up

When moving your refrigerator

To prevent fl oor damage be sure the front CAUTION leveling legs are in the up position(above the

floor). Refer to ‘Adjusting the doors’ in the manual (on page 13)

Flat-blade	Control Lever
screwdriver(-)

FLOORING

For proper installation, this refrigerator must be placed on a level surface of hard material that is the same height as the rest of the fl ooring. This surface should be strong enough to support a fully loaded refrigerator, or approximately 106kg.

To protect the fi nish of the fl ooring, cut a large section of the cardboard

carton and place under the refrigerator where you are working. When moving the refrigerator, be sure to pull it straight

out and return it to position by pushing it

straight in.

INSTALLATION OF THE WATER LINE (AUTO ICE MAKER MODEL)

Before you install the water line

•The water line installation is not warranted by the refrigerator manufacturer.

So before you install the water line, read the whole steps for installing and follow these instructions carefully to minimize the risk of expensive water damage.

•Banging pipes (water banging in the pipes) in house plumbing can cause damage to fridge parts and lead to water leakage or fl ooding. Call a qualifi ed plumber to correct the problem before installing the water supply line to the fridge.

DA68-01868T.indb 섹션2:06 2011.7.4 9:22:2 PM