When selecting the temperature, the set temperature is displayed initially for 5 seconds, then the actual temperature is displayed.
(There may be slight difference between the set temperature and displayed actual temperature, but it will be corrected to the set temperature automatically.)
- The Freezer temperature will change
depending on the number of door openings, quantity of food, ambient temperature, etc.
-The temperature display will blink when freezer temperature increases due to frequent door opening, keeping warm food, etc.
(Blinking will stop when the refrigerator reaches normal temperature. If for some reason it does not stop after a long period of time, contact a Samsung service center.)
4Fridge
If you want to control the fridge temperature, follow as below.
Press the Fridge Button (Refer the picture)
-The temperature can be set in 1ºC interval between 1ºC and 7ºC.
When selecting the fridge temperature, the set temperature is displayed initially for 5 seconds, then the actual temperature is displayed.
(There may be slight difference between the set temperature and displayed actual temperature, but it will be corrected to the set temperature automatically.)
- The Fridge temperature will change depending on the number of door openings, quantity of food, ambient temperature, etc.
-Temperature of each shelve or container in the fridge may be different.
-The temperature display will blink when fridge temperature is increases due to frequent door opening, keeping warm food, etc.
16_ operating
(Blinking will stop when the refrigerator reaches normal temperature. If for some reason it does not stop after a long period of time, contact a Samsung service center.)
5Power Cool
Press the Power Cool Button. (Refer to the picture.)
-The Power cool light on the display goes on (see the arrow mark) and this function begins to operate regardless of the set fridge temperature.
Press the Power Cool Button again to cancel this function.
-The light goes off and it operates at the set fridge temperature again.
The Power Cool function operates for 2 and a half hours regardless of the set temperature.
6E.Saver Button
Press the Energy Saver button for better energy effi ciency. If water drops appear on the doors, turn the Energy Saver function off.
MAKING ICE
Auto Ice Maker Model
The ice maker will produce 8
cubes per cycle - approximately 100~130 cubes in a
conditions. Throw away the fi rst few batches of ice to allow the water line to clear. Be sure nothing interferes with the sweep of the feeler arm. When the bin fi lls to the level of the feeler arm, the icemaker will stop producing ice.
After the icemaker has been turned on again, there will be a time delay before the icemaker resumes operation.
It is normal for several cubes to be joined together.
If ice is not used frequently, old ice cubes will become cloudy, taste stale and shrink. So if you don’t want to make ice, press the Ice Off button.
2011.7.4 9:22:13 PM |
