Toshiba 42WL68T, 42WL68E Activating the black stretch, Activating the DNR Digital Noise Reduction

Using the TV’s features

Activating the black stretch

This function increases the strength of dark areas of the picture which improves definition.

1 Press M, then press Y or y to display the PICTURE menu.

PICTURE
Picture settings	OK
Color management	Off
Base color adjustment
Active Backlight Control	On
Cinema mode	On
meta brain PRO 100	On
MENU Back EXIT Watch TV

2	Press < or > to select the Picture settings menu,
3	then press Q.
	Press < or > to select Black stretch on the 2nd page.
		Picture settings	2/2
		Black stretch	On
		MPEG NR	Low
		DNR	Auto
		Color Temperature	Cool
4		MENU Back EXIT Watch TV
	Press Y or y to select On or Off.
		Black stretch	On

Note:

In the PC input mode (- page 20), this mode is not available.

Activating the MPEG NR (Noise Reduction)

If the receiving signal of MPEG is a mosquito (grained) noise depending on the compression and conversion, the noise may be reduced when using this function.

1 From the Picture settings menu, press < or > to select MPEG NR on the 2nd page.

2 Press Y or y to select Off, Low, Middle or High.

MPEG NR High

Note:

In the PC input mode (- page 20), this mode is not available.

Activating the DNR (Digital Noise Reduction)

If the receiving signal is weak and the picture is blurry, the picture may be improved when using this function.

1 From the Picture settings menu, press < or > to select DNR on the 2nd page.

2 Press Y or y to select Auto, Off, Low, Middle, or High.

DNR Auto

Selecting the color temperature

You can change the tone of the picture by selecting from three preset color temperatures: Cool, Normal or Warm.

1 From the Picture settings menu, press < or > to select Color Temperature on the 2nd page.

2 Press Y or y to select mode you prefer.

Color Temperature Cool

Cool: Lends a blue hue to the picture.

Normal: Neutral

Warm: Lends a red hue to the picture.

Adjusting the color management

You can adjust the picture color quality by selecting from 6 base color adjustments : Red, Green, Blue, Yellow,

Magenta or Cyan.

1	From the PICTURE menu, press < or > to select
2	Color management.
	Press Y or y, then press < or > to select On.
3		Color management						On
	Press Q, then press < or > to select Base color
4	adjustment.
	Press Q, then press < or > to select an item you want
5	to adjust.
	Press y, then press Y or y to select Hue or Saturation.
			Base color adjustment
						Hue		Saturation
			Red		0			0
			Green		0			0
			Blue		0			0
			Yellow		0			0
			Magenta		0			0
			Cyan		0			0
		Reset						OK
6		MENU Back		EXIT Watch TV
	Press < or > to adjust the settings as required.
				Hue			Saturation
			Red
				0				0

Notes:

•If you select color management Off mode, this mode is not available.

•In the PC input mode (- page 20), this mode is not available.

Resetting the base color adjustment

The Reset function adjusts the base color adjustment to the factory settings.

1 From the Base color adjustment menu, press < or

>to select Reset.

2 Press Q.

Using the active backlight control

In order to improve screen visibility, the active backlight control sets the screen brightness automatically during dark scenes.

1 From the PICTURE menu, press < or > to select Active Backlight Control.

2 Press Y or y to select On or Off.

16