Bissell 1698 Troubleshooting - continued, Dirtlifter PowerBrush does not turn, Possible Causes

Page 15
Troubleshooting - continued

Troubleshooting - continued

Dirtlifter® PowerBrush does not turn.

 

Possible Causes

Remedies

The Brush Belt or Pump Belt may be broken.

Turn the machine OFF and unplug from the outlet. To check if a Brush Belt has broken,

you will need a flat head screwdriver. Insert the blade end into the lower slot of the Belt Access door to release the lower snap. If necessary, insert the blade end into the upper slot to release the upper snap. Examine for belt breakage. The Brush Belt should be visible, looped around the motor shaft.

If it is broken or missing, please refer to Part Numbers and Descriptions on page 17 before calling Customer Service. Complete installation instructions will accompany the replacement belt.

Vacuum not picking up solution.

 

 

Possible Causes

Remedies

 

ReadyTools™ switch may be at the

Set ReadyTools™ switch to either Tools or

 

wrong setting for the cleaning job.

PreTreat or Floor Cleaning.

 

Drain cap may be missing or not

Remove Tank-in-Tank,™loosen and

 

properly installed at back of

re-tighten Drain Cap.

 

Tank-in-Tank.™

 

 

Tank-in-Tank™lid is not

Re-install lid; refer to The Basics section.

 

properly installed.

 

Tank-in-Tank™is not properly seated.

Tank-in-Tank™must be firmly seated to function; remove and reseat Tank-in-Tank.™

Poor tool position.

Adjust angle; apply more downward pressure.

(Hand held attachments only).

 

Tank-in-Tank™has picked up

Empty Tank-in-Tank,™refer to

maximum dirty water.

The Basics section.

16

Page 14 Page 16
Image 15
Page 14 Page 16
Contents DirtLifter PowerBrush lifts deep down dirt, grooms carpet Assembly Operation Safety StorageSmartClean System pre-treats, loosens, and lifts out dirt 1698 POWERSTEAMER PROHEATTM PLUS SERIESIMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONSGROUNDING INSTRUCTIONS PreCleaner What comes withyour cleaner cordpowerWrapand flex hoseSmartTemp The BISSELL SmartClean SystemThe Basics How it works IndexSmartMix The Basics - continuedWARNING Use only DirtLifter PowerBrushTank-in-Tank is easy to use BISSELL cleaning formulas in yourNOTE Fill the Bladder with water only When it’s time to empty the Tank-in-TankAssembly How to use TurboBrush attachmentThe Flow Indicator ReadyTools SwitchMachine Preparation How to clean carpetsNormal Cleaning cleaning solution or water onlyHow to clean upholstery and small areas Cleaning TechniqueImportant - Check Upholstery Tags Cleaning bare floors Attach the Bare Floor ToolCaution Do not use on hardwood floors 18. Repeat steps 1 and 2 backing along the exit path Bare Floor Cleaning TechniqueCaution Do not over wet 13. Check ReadyTools switch - it should be set on Floor CleaningMaintenance/Putting it away Remedies TroubleshootingSmartTemp Power Switch does not illuminate Possible CausesTroubleshooting - continued Dirtlifter PowerBrush does not turnVacuum not picking up solution 16 010-1795 SmartMix Cap Assembly 17 010-1651 Flow Indicator Cap BISSELL Customer ServicePart numbers and descriptions Item Part No. Part NameAttn Customer Service Box Niagara Falls, Ont., L2E 6W2 About your warrantyBISSELL Customer Service One Year Warranty
Related manuals
Manual 20 pages 2.89 Kb Manual 22 pages 62.08 Kb

1698 specifications

The Bissell 1698 is a powerful and versatile carpet cleaner designed to tackle tough stains and maintain your home's cleanliness. Known for its effective cleaning capabilities, this model combines innovative technologies with user-friendly features, making it a preferred choice for many homeowners.

One of the standout features of the Bissell 1698 is its advanced cleaning system, which utilizes a combination of heat and powerful suction to lift and eliminate dirt, stains, and odor from carpets and upholstery. Its Heatwave Technology helps maintain consistent water temperature, which is crucial for achieving optimal cleaning results. When paired with Bissell's specially formulated cleaning solutions, this model effectively breaks down and removes embedded dirt and stains, leaving carpets looking refreshed.

The machine is also equipped with a large water tank, allowing for extended cleaning sessions without frequent refills. The dual-tank system separates clean and dirty water, ensuring that you are always using fresh, hot water when cleaning. This efficient design contributes to a more hygienic cleaning process, as dirty water is kept isolated from the clean solution.

Another important characteristic of the Bissell 1698 is its lightweight and compact design, making it easy to maneuver around furniture and tight spaces. The included 4-foot hose and specialized attachment tools allow for targeted cleaning in areas such as stairs, upholstery, and upholstery. The powerful rotating brush roll not only deep cleans carpets but also lifts pet hair and debris from the fibers, making it an ideal choice for pet owners.

User convenience is further enhanced by the easy-to-use controls and quick assembly process, allowing you to set up and start cleaning in no time. The machine also features a washable filter, which simplifies maintenance and prolongs the unit's lifespan.

In conclusion, the Bissell 1698 is a top-tier carpet cleaner that combines powerful cleaning technology with user-friendly features. Its Heatwave Technology, dual-tank system, and lightweight design make it an efficient choice for maintaining a clean and fresh home. Whether you’re dealing with stubborn stains, pet hair, or general messes, the Bissell 1698 is equipped to meet your cleaning needs with ease and effectiveness.
Top Page Image Contents