Bissell 1698 When it’s time to empty the Tank-in-Tank, NOTE Fill the Bladder with water only

Page 7
NOTE: Fill the Bladder with water only.

The Basics - continued

Rotate Handle to Unlatch

Fill Bladder only with clean tap water.

4.Set the tank down and rotate the handle forward to unlatch the lid. Lift off and set the lid aside.

5.Find the mouth of the bladder and fill to the bottom of the neck with hot tap water.

NOTE: Fill the Bladder with water only.

6.Replace the tank lid matching the lid and tank edges. Handle must be in forward position to reinstall.

7.Rotate the handle to the carrying position to re-latch the lid.

8.Replace tank in machine base, seating firmly in place.

9.Rotate handle back down to the latched position.

When it’s time to empty the Tank-in-Tank™

10.Remove the Tank-in-Tank™– follow steps 1 and 2 on page 7.

11.Carry the Tank-in-Tank,™like a bucket, to the sink where you will dispose of the dirty water.

12.Place in or at edge of sink, turn the Tank Drain Cap and remove to release the dirty water.

13.Replace Drain Cap.

14.Refill with clean tap water as above, steps 5 through 9, and refill the SmartMix® Bottle with BISSELL cleaning solution, as necessary.

When filling bottle or storing unit, set

dial to:

 

le

 

e

as

R

 

 

e

Tank Drain Cap

Tighten

15.If the cleaning job is complete, rinse out the Tank-in-Tank™by rinsing clean water between the bladder and tank.

16.Replace the Tank Drain Cap and return the Tank-in-Tank™to the machine, following steps 6 through 9 above.

17.Refer to the Putting it Away section, page 14, for the final cleanup.

Latched

8

Page 6 Page 8
Image 7
Page 6 Page 8
Contents DirtLifter PowerBrush lifts deep down dirt, grooms carpet Assembly Operation Safety StorageSmartClean System pre-treats, loosens, and lifts out dirt 1698 POWERSTEAMER PROHEATTM PLUS SERIESSAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONSGROUNDING INSTRUCTIONS PreCleaner What comes withyour cleaner cordpowerWrapand flex hoseSmartTemp The BISSELL SmartClean SystemThe Basics How it works IndexSmartMix The Basics - continuedWARNING Use only DirtLifter PowerBrushTank-in-Tank is easy to use BISSELL cleaning formulas in yourNOTE Fill the Bladder with water only When it’s time to empty the Tank-in-TankAssembly How to use TurboBrush attachmentThe Flow Indicator ReadyTools SwitchMachine Preparation How to clean carpetsNormal Cleaning cleaning solution or water onlyCleaning Technique How to clean upholstery and small areasImportant - Check Upholstery Tags Attach the Bare Floor Tool Cleaning bare floorsCaution Do not use on hardwood floors 18. Repeat steps 1 and 2 backing along the exit path Bare Floor Cleaning TechniqueCaution Do not over wet 13. Check ReadyTools switch - it should be set on Floor CleaningMaintenance/Putting it away Remedies TroubleshootingSmartTemp Power Switch does not illuminate Possible CausesDirtlifter PowerBrush does not turn Troubleshooting - continuedVacuum not picking up solution 16 010-1795 SmartMix Cap Assembly 17 010-1651 Flow Indicator Cap BISSELL Customer ServicePart numbers and descriptions Item Part No. Part NameAttn Customer Service Box Niagara Falls, Ont., L2E 6W2 About your warrantyBISSELL Customer Service One Year Warranty
Related manuals
Manual 20 pages 2.89 Kb Manual 22 pages 62.08 Kb

1698 specifications

The Bissell 1698 is a powerful and versatile carpet cleaner designed to tackle tough stains and maintain your home's cleanliness. Known for its effective cleaning capabilities, this model combines innovative technologies with user-friendly features, making it a preferred choice for many homeowners.

One of the standout features of the Bissell 1698 is its advanced cleaning system, which utilizes a combination of heat and powerful suction to lift and eliminate dirt, stains, and odor from carpets and upholstery. Its Heatwave Technology helps maintain consistent water temperature, which is crucial for achieving optimal cleaning results. When paired with Bissell's specially formulated cleaning solutions, this model effectively breaks down and removes embedded dirt and stains, leaving carpets looking refreshed.

The machine is also equipped with a large water tank, allowing for extended cleaning sessions without frequent refills. The dual-tank system separates clean and dirty water, ensuring that you are always using fresh, hot water when cleaning. This efficient design contributes to a more hygienic cleaning process, as dirty water is kept isolated from the clean solution.

Another important characteristic of the Bissell 1698 is its lightweight and compact design, making it easy to maneuver around furniture and tight spaces. The included 4-foot hose and specialized attachment tools allow for targeted cleaning in areas such as stairs, upholstery, and upholstery. The powerful rotating brush roll not only deep cleans carpets but also lifts pet hair and debris from the fibers, making it an ideal choice for pet owners.

User convenience is further enhanced by the easy-to-use controls and quick assembly process, allowing you to set up and start cleaning in no time. The machine also features a washable filter, which simplifies maintenance and prolongs the unit's lifespan.

In conclusion, the Bissell 1698 is a top-tier carpet cleaner that combines powerful cleaning technology with user-friendly features. Its Heatwave Technology, dual-tank system, and lightweight design make it an efficient choice for maintaining a clean and fresh home. Whether you’re dealing with stubborn stains, pet hair, or general messes, the Bissell 1698 is equipped to meet your cleaning needs with ease and effectiveness.
Top Page Image Contents