Black & Decker PD1080, PD1200 manual Use, Cleaning and maintenance

Page 7

Use

Before first use, the batteries must be charged for at least 24 hours.

Connect the appliance and the powered brush head (13) to the charger for a minimum of 24 hours.

Charge the batteries as described below.

You may need to charge/discharge the appliance a minimum of 5 times in order to achieve the best running time performance.

Charging the battery (fig. A & E)

Warning! Do not charge the battery at ambient temperatures below 10°C or above 40°C.

Note: If your vacuum cleaner is supplied with a single charger with a dual lead to charge both the appliance and the powered brush head (13), the jack plugs are the same size and are interchangeable. The appliance and the powered brush head (13) can be charged at the same time.

To charge the appliance:

Make sure that the appliance is switched off. The battery will not be charged with the on/off power switch

(1) in the on position.

Insert the plug into the charging inlet (6) in the base.

Plug in the charger and switch on at the mains.

The charging indicator (8) will be lit.

For the first charging, leave the appliance to charge for at least 24 hours.

To charge the powered brush head:

Make sure that the powered brush head (13) is switched off. The battery will not be charged with the on/off power switch (17) in the on position.

Insert the plug into the charger inlet (16).

Plug in the charger and switch on at the mains.

The charging indicator (15) will be lit.

For the first charging, leave the appliance to charge for at least 24 hours.

While charging, the charger may become warm. This is normal and does not indicate a problem.

While it is safe to leave the appliance/powered brush head connected to the charger indefinitely, to reduce power consumption, we would recommend unplugging the charger after 24 hours. The charging indicators will be lit as long as the appliance is connected to the plugged-in charger.

Switching on and off

To switch the appliance on, slide the on/off power switch (1) to the right to position 1.

To switch the appliance off, slide the on/off power switch (1) to the left until it clicks into the off position.

Vacuuming

When operating the appliance, make sure that the hose is not trapped, twisted or blocked.

The handle (2) can be easily removed from the appliance allowing you to reach up to 1.5 m from the appliance.

With the handle (2) removed, the appliance can be carried using the built-in handle.

The handle (2) can also be removed from the hose (4) so that you can connect an accessory directly to the hose cuff (18) when required.

Hints for optimum use

When working in confined spaces, temporarily remove the accessory caddy (12) from the base to improve your scope.

When vacuuming stairs, always start at the bottom and work your way up.

Using the powered brush head (fig. A)

The powered brush head (13) can only be used with the handle removed from the appliance.

To switch the powered brush head to on, move the on/ off switch (17) to the on position .

slide the on/off power switch (1) to the on position.

Move the powered brush head (13) steadily backwards and forwards. Do not keep the brush on the same place for a long time, as this might damage the surface.

Move the on/off switch (17) to the off position to switch the powered brush head off.

Optimising the suction force

In order to keep the suction force optimised, the filters must be cleared regularly during use.

Turn the filter cleaning wheel (5) two turns clockwise to remove out any dust from the filters.

The fine particulate filter must be cleaned regularly, see “Cleaning the fine particulate filter” section.

Cleaning and maintenance

Emptying the dust container (fig. F)

The dust container must be emptied regularly, preferably after every use.

Release the door catch (9) and open the transparent door (7) 180° until it clicks in the open position.

Remove the pre-filter (19).

Empty the dust container.

Clean the pre-filter (19) by lightly shaking over a dustbin.

Refit the pre-filter (19).

7

Image 7
Contents Powerful Solutions TM English Original instructions 121 PD1200 onlyPage Intended use Safety instructionsAssembly Use Cleaning and maintenanceReplacing the filters Cleaning the fine particulate filter fig. HClearing the powered brush head fig. H Protecting the environmentCharger A170020D GuaranteeTechnical data PD1200 H2 PD1080 H2 Powered brush headE15650 13 01 H1 H2English $XVWUDOLD

PD1200, PD1080 specifications

The Black & Decker PD1200 and PD1080 are two popular models in the cordless dustbuster series, known for their powerful suction and user-friendly design. These handheld vacuum cleaners are ideal for maintaining cleanliness in homes and offices, offering convenience and efficiency for quick cleanups.

The PD1200 stands out with its robust, lightweight design and battery power, making it an excellent choice for those looking for a reliable cordless vacuum. It features a 12-volt battery, providing ample power to tackle various surfaces, from carpets to hard floors. One of its key features is the cyclonic action technology that helps to maintain strong suction power by separating larger debris from finer dust particles. This ensures that the vacuum cleans efficiently and maintains peak performance over time.

The PD1080, on the other hand, is designed for those who prioritize portability and ease of use. It operates on an 8-volt battery, making it lightweight and more compact, perfect for quick cleanups in tight spaces. The PD1080 also incorporates cyclonic action technology, ensuring that dirt and debris are effectively captured, promoting longevity and suction efficiency.

Both models come equipped with a washable dirt bowl, making maintenance hassle-free. The easy-empty dirt bowl feature allows users to dispose of captured debris without getting their hands dirty, enhancing the overall user experience. Additionally, the ergonomic design of the handles ensures comfortable usage for extended periods.

Another significant advantage of the Black & Decker PD1200 and PD1080 is their versatility. They include various attachments, such as a crevice tool and brush, enabling users to clean different surfaces and hard-to-reach areas with ease. This adaptability makes them suitable for various tasks, including cleaning upholstery, car interiors, and tight corners.

Inclusion of a charging base in both models ensures that the vacuum is always ready for action, eliminating concerns of running low on battery life during unexpected messes. Users appreciate the quick charging time, which allows for minimal downtime between cleanings.

In conclusion, the Black & Decker PD1200 and PD1080 handheld vacuums are excellent choices for anyone seeking effective, convenient, and versatile cleaning solutions. With their powerful suction capabilities, user-friendly features, and innovative technologies, these models provide an ideal blend of performance and practicality for everyday cleaning tasks.