Important Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radia- tors, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been dam- aged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed

15.Only connect to the type of house-hold power supply as indicated in the operating instructions and rating label.

16.Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock.

17.Never push objects of any kind or spill liquid into this product through openings as this could result in a risk of fire or electric shock.

18.When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer. Ask the service technician to per- form safety checks to ensure proper operation to avoid possible fire, electric shock, or other hazards.

19.If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against volt- age surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna connection to grounding electrodes, and requirements for the grounding electrode.

20.The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

21.Where the AC plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.