Billy Goat KD612, KD512HCS owner manual Sound, Vibration Data, Intended USE

Page 6

KD Owner’s Manual

SOUND

SOUND LEVEL 97 dB(a) at Operator Position

Sound tests were conducted in accordance with 2000/14/EEC, and were performed on 2-21-2002 under the conditions listed below.

Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound power level for your model.

General Conditions:

Sunny

Temperature:

45oF (7.2oC)

Wind Speed:

5 mph (8.1 kmh)

Wind Direction:

South West

Humidity:

60%

Barometric Pressure:

30.18”Hg (767 mm Hg)

VIBRATION DATA

VIBRATION LEVEL 0.34g (3.29m/s2)

Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using calibrated vibration test equipment. Tests were performed on 5-25-2006 under the conditions listed below.

General Conditions:

Sunny

Temperature:

89oF (31.7oC)

Wind Speed:

13.6 mph (21.9kph)

Wind Direction:

East

Humidity:

22.8%

Barometric Pressure:

29.9Hg (101.3kpa)

INTENDED USE

INTENDED USE: This machine is designed for vacuuming leaves, grass clippings and other types of organic litter and for chipping brush, limbs, corn and sunflower stalks and palm fronds.

Debris mixed with cans, bottles and small amounts of sand can be vacuumed; however, it is not this machine's primary purpose. Vacuuming cans, bottles and sand will affect the longevity of your machine.

Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for damaged or worn impeller, loose impeller bolt, loose impeller key, loose engine or lodged foreign objects. Note: See parts list for proper impeller bolt torque specifications. (See trouble shooting section on page 12).

Part No 890033

6

Form No F062306A

Image 6
Contents Billy Goat KD Vacuum Contents About this ManualSpecifications Serial Plate DataGeneral Safety Instructions and Symbols Form No F062306A Sound Vibration DataIntended USE Instruction Labels Engine LabelsEngine Controls Packing Checklist AssemblyOperation StartingVacuuming Operation Maintenance Periodic MaintenanceTroubleshooting Warranty Claim ProcedureMaintenance Record Parts Drawing KD Parts List S C R IP T IO NForm No F062306A