Billy Goat TR1304H, TR1104 owner manual Sound, Vibration Data, Intended USE

Page 6

HTR/TR Owner’s Manual

SOUND

SOUND LEVEL 105 dB(a) at Operator Position

Sound tests were conducted in accordance with 2000/14/EEC, and were performed on 5-28-2002 under the conditions listed below.

Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound power level for your model.

General Conditions:

Sunny

Temperature:

45oF (7.2oC)

Wind Speed:

5 mph (8.1 kmh)

Wind Direction:

South West

Humidity:

60%

Barometric Pressure:

30.18Hg (767 mm Hg)

VIBRATION DATA

VIBRATION LEVEL 0.02g

Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using calibrated vibration test equipment. Tests were performed on 7-14-94 under the conditions listed below.

General Conditions:

Sunny

Temperature:

78oF (23.8oC)

Wind Speed:

16 mph (25.7kmh)

Wind Direction:

South East

Humidity:

62%

Barometric Pressure:

30.1”Hg (765mm Hg)

INTENDED USE

INTENDED USE: This machine is designed for vacuuming leaves, grass clippings and other types of organic litter. Debris mixed with cans, bottles and small amounts of sand can be vacuumed; however, it is not this machine's primary purpose. Vacuuming cans, bottles and sand will affect the longevity of your machine.

Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for damaged or worn impeller, loose impeller bolt, loose impeller key, loose engine or lodged foreign objects. Note: See parts list for proper impeller bolt torque specifications. (See trouble shooting section on page 12).

Part No 811202

6

Form No F021307B

Image 6
Contents Intake ExhaustContents About this ManualSpecifications Serial Plate DataGeneral Safety Instructions and Symbols Form No F021307B Sound Vibration DataIntended USE Honda Instruction LabelsEngine Labels Briggs & Stratton Vanguard Throttle Controls Briggs and StrattonPacking Checklist PUT OIL in Engine Before StartingTR Models Assembly OperationHandling & Transporting Vacuuming Operation Hose Operation TipsStorage Impeller Removal MaintenancePeriodic Maintenance Interlock SystemTroubleshooting Warranty Claim ProcedureMaintenance Record Parts Drawing HTR/TR Parts List Label Danger Keep Hands and Feet AwayDescription