Enerco TSBF10NG installation instructions Blue Flame Heaters Plaque Heaters, MHBF30NGT MHBF20NGT

Page 1

INSTALLATION INSTRUCTIONS

AND OWNER’S MANUAL

READ INSTRUCTIONS CAREFULLY: Read and follow all instructions. Place instructions in a safe place for future reference. Do not allow anyone who has not read these instructions to assemble, light, adjust or operate the heater.

UNVENTED NATURAL GAS FIRED ROOM HEATER

Blue Flame Heaters

 

Plaque Heaters

 

Model #

Burn Rate

Model #

Burn Rate

MHBF10NG/TSBF10NG

10,000 Btu/hr

MHIR10NG/TSIR10NG

10,000 Btu/hr

MHBF20/NGT/TSBF20NGT

20,000 Btu/hr

MHIR20NGT/TSIR20NGT

20,000 Btu/hr

MHBF30NGT/TSBF30NGT

30,000 Btu/hr

MHIR30NGT/TSIR30NGT

30,000 Btu/hr

MHBF30NGT/

MHBF20NGT/

MHBF10NG/

TSBF20NGT

TSBF10NG

TSBF30NGT

 

 

MHIR30NGT/

MHIR20NGT/

MHIR10NG/

TSIR30NGT

TSIR20NGT

TSIR10NG

WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury, or loss of life.

-Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

-WHAT TO DO IF YOU SMELL GAS

Do not try to light any appliance

Do not touch an electrical switch; do not use any phone in your building.

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

If you cannot reach your gas supplier, call the fire department.

-Installation and service must be performed by a qualified installer, service agency, or the gas supplier.

WARNING: This is an unvented gas-fired heater. It uses air (oxygen) from the room in which it is installed. Provisions for adequate combustion and ventilation air must be provided. Refer to Fresh Air for Combustion and Ventilation section on page 3 of this manual.

WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to this manual for correct installation and operational procedures. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

ENERCO GROUP, INC., 4560 W. 160

TH

Installation instructions and Owner’s

70574Manual Rev. C 08/05

 

 

ST., CLEVELAND,1

OHIO 44135 · 216-916-3000

 

 

 

 

 

 

 

Image 1
Contents MHBF30NGT MHBF20NGT Blue Flame Heaters Plaque HeatersTSBF20NGT TSBF10NG TSBF30NGT MHIR30NGT MHIR20NGT TSIR30NGT TSIR20NGT TSIR10NGCarbon Monoxide Poisoning PrecautionsNatural Gas Thermostatic Control on Thermostat Models Safety DeviceLocal Codes Ignition SystemVentilation AIR Determining the Type of Heater Location SpaceVentilation from Inside Building This Installation Requires InstallationLocating Heater Ventilation from OutdoorsMounting Bracket Fastening Heater to WallFloor Mounting Away from Wall Connecting to GAS SupplyTest pressure in Excess of ½ psig 3.5kPa Electrical Wiring Diagram Pressure Testing Heater Gas ConnectionsWhat to do if YOU Smell GAS Lighting Instructions Operating Your Heater Thermostat Models To Turn OFF GAS to ApplianceShutting OFF Heater Shutting OFF Burner only Pilot Stays LITInspecting Burner Thermostat Control OperationPilot Flame Pattern Burner Flame PatternCleaning ODS/PILOT and Burner Cleaning and MaintenanceCleaning Burner Pilot AIR Hole Inlet Cleaning Heater CabinetObserved Symptom Possible Cause Remedy TroubleshootingObserved Symptom Possible Cause Remedy Troubleshooting CON’TIR10NG IR20NGT IR30NGT SpecificationsBF10NG BF20NGT BF30NGT Parts Under Warranty Replacement PartsParts not Under Warranty Technical ServiceBF20NGT BF30NGT Thermostat modelsIR20NGT20-235 IR30NGTDescription QTY Parts ListIR20NGT BF20NGT IR30NGT BF30NGT Regulator to Thermostat Valve tube Ass’y NON-Thermostat models MHIR10NG, MHBF10NG, TSIR10NG, TSBF10NGIR10NG BF10NGIR10NG BF10NG MHIR10NG, MHBF10NG, TSIR10NG, TSBF10NGDescription QTY Warranty Information
Related manuals
Manual 24 pages 14.57 Kb

MHIR30NGT, TSBF20NGT, MHBF30NGT, MHBF10NG, MHIR10NG specifications

The Enerco HSIR10NG, TSIR10NG, TSBF10NG, TSIR20NGT, and MHBF6NG are a line of innovative heating solutions designed to meet various heating needs in both residential and commercial applications. Each model is engineered with advanced technologies and features that prioritize efficiency, performance, and user convenience.

The HSIR10NG is a high-efficiency infrared heater that operates on natural gas. It provides powerful heating with minimal energy consumption, utilizing infrared technology to warm objects and people directly rather than just the surrounding air. This results in faster heating and lower energy costs, making it an ideal choice for garages, workshops, or outdoor spaces.

Following closely is the TSIR10NG, another natural gas infrared heater known for its compact design and efficiency. This model features a state-of-the-art burner design that maximizes heat output while ensuring low emissions. The TSIR10NG is particularly suited for smaller spaces, providing targeted heating where it is needed most. It can easily be mounted on walls or ceilings, offering versatility in installation options.

The TSBF10NG is a dual-fuel infrared heater, allowing users to switch between natural gas and propane as needed. This flexibility makes it suitable for various environments and user preferences. The heater's robust construction ensures durability, while its adjustable heating levels allow for customized comfort.

For larger areas, the TSIR20NGT offers an enhanced heating capacity with similar infrared technology. This model is ideal for industrial or commercial spaces requiring efficient heating. With its advanced thermostat controls, users can maintain a consistent temperature while benefiting from lower operational costs.

Lastly, the MHBF6NG is a portable heating solution designed for versatility and convenience. This compact model is perfect for temporary heating needs, featuring an easy-to-use design that allows for quick setup and relocation. Its propane compatibility makes it a popular choice for outdoor events, workshops, or emergency heating situations.

Each model is equipped with advanced safety features, including automatic shutoff mechanisms and durable heat-resistant materials, ensuring peace of mind during operation. The Enerco line is engineered not only for performance but also for ease of maintenance, making them reliable options for users seeking efficient heating solutions. Overall, Enerco's HSIR10NG, TSIR10NG, TSBF10NG, TSIR20NGT, and MHBF6NG provide a range of effective heating options tailored to diverse environments and user needs, combining innovation with practical functionality.