Rheem Electric Commercial Water Heater warranty Available in 85 and 105 Gallon Capacities

Page 1

Eclipse Electric Commercial Water Heaters

Available in 85 and 105 Gallon Capacities

12 KW through 24 KW 208, 240, 270 and 480 voltages

Rheem-Ruud Eclipse electric commercial water heaters are designed to provide hot water where applications require moderate quantities. These units are suited for a wide variety of applications such as retail stores, small offices or any location where a moderate amount of hot water is required.

Construction Features:

Exclusive 10 Year

Limited Tank Warranty

Lightweight –

less than half of

conventional products

No Anode Required

System Sentinel

Inconel Heating

Elements

Industry Leading

Insulation Factors –

Composite tank and high density polyethylene dent and scratch resistant jacket.

Models are in two sizes with capacity of 85 or 105 gallons in 42 total variations.

Input options are: 12.4, 18 or 24 kW.

Voltage options are: 208, 240, or 480 VAC in either single phase or 3-phase and 277 VAC in single phase only.

Element wattages are 3100,

4500 or 6000 in each of the four voltages. The elements are low watt density design (46, 67, 90 watts/sq. in.) with stainless (Inconel) sheath.

The four Inconel elements are spaced on the front along a vertical line for easy access.

The power control circuits use 2 surface mounted thermostats and operate in two stages so that a lower control thermostat is for the lower two elements and an upper

control is for the upper two elements. The lower element will provide recovery for all needs and the upper two will kick in addition- ally for larger demands.

170° F maximum delivered temperature.

System Sentinel LED indicators are provided for each element to show power on.

A switch is provided in the control circuit for installation dry fire protection. See label.

A temperature and pressure relief valve is installed on top of the unit.

Water connections at the top of the tank are 1" swivel nuts. A nipple is installed on the outlet (1" x 3" long). The inlet has a vacuum valve connected with a 1 x 1 x 3/4 tee and a 1" close nipple to the swivel.

3/4" full flow drain valve.

Standards approved to UL 1453 and UL/NSF 005.

means very low operating costs

 

 

 

 

DENT L

AB

 

 

 

 

 

EN

 

 

 

 

 

 

 

P

 

 

 

O

 

 

 

 

 

 

 

 

R

 

 

 

I N

D

E

 

 

 

A

 

 

 

 

 

 

T

N

 

 

 

 

 

 

O

 

 

 

 

 

 

 

 

R

A

 

 

 

 

 

 

 

 

Y

 

 

 

 

 

 

 

 

E

 

 

®

 

 

 

Y

S

 

 

 

 

 

 

T

 

 

 

 

 

 

 

 

 

T

 

 

 

 

E

T

 

 

I

 

 

 

F

 

 

 

N

 

 

 

 

 

 

 

 

G

FO

 

 

SA

 

 

 

 

 

 

 

LIC

 

 

 

 

 

 

 

R PUB

 

 

 

Certifications and Ratings:

Efficiency – These models have been tested according to DOE test procedures, and exceed the minimum energy factor requirements of current ASHRAE Standards (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy efficiency codes of all states including California Energy Commission (CEC).

Safety and Construction – These products are design certified by Underwriters Laboratories (UL) to meet UL standard 1453 as electric storage tank water heaters. All models are North Carolina and Massachusetts Code compliant. Certified for a 150 PSI Maximum Working Pressure.

Continued on reverse.

Image 1
Contents Certifications and Ratings Available in 85 and 105 Gallon CapacitiesLimited Warranty Recommended SpecificationsTemperature Rise Input Number