Connecting to GAS Supply, Typical Inlet Pipe Diameters

INFRARED PROPANE/LP GAS HEATER

INSTALLATION

Continued

CONNECTING TO GAS SUPPLY

WARNING: This appliance re- quires a 3/8" NPT (National Pipe Thread) inlet connection to the pressure regulator.

WARNING: A qualified service person must connect heater to gas supply. Follow all local codes.

CAUTION: Never connect heater directly to the propane/ LP supply. This heater requires an external regulator (not sup- plied). Install the external regu- lator between the heater and propane/LP supply.

CAUTION: Use only new, black iron or steel pipe. Internally-tinned copper tubing may be used in certain areas. Check your local codes. Use pipe of large enough diameter to allow proper gas vol- ume to heater. If pipe is too small, undue loss of pressure will occur.

Typical Inlet Pipe Diameters

FB-3B/FBS-3C	3/8" or greater
FB-5B/FBS-5C	1/2" or greater

Installation must include equipment shutoff valve, union, and plugged 1/8" NPT tap. Locate NPT tap within reach for test gauge hook up. NPT tap must be upstream from heater (see Figure 15).

IMPORTANT: Install an equipment shutoff valve in an accessible location. The equip- ment shutoff valve is for turning on or shutting off the gas to the appliance.

Apply pipe joint sealant lightly to male threads. This will prevent excess sealant from going into pipe. Excess sealant in pipe could result in clogged heater valves.

CAUTION: Use pipe joint seal- ant that is resistant to liquid pe- troleum (LP) gas.

Install sediment trap in supply line as shown in Figure 15. Locate sediment trap where it is within reach for cleaning. Locate sedi- ment trap where trapped matter is not likely to freeze. A sediment trap traps moisture and contaminants. This keeps them from going into heater controls. If sediment trap is not installed or is installed wrong, heater may not run properly.

IMPORTANT: Hold pressure regulator with wrench when connecting it to gas pip- ing and/or fittings.

The installer must supply an external regu- lator. The external regulator will reduce incoming gas pressure. You must reduce incoming gas pressure to between 11 and 14 inches of water. If you do not reduce incom- ing gas pressure, heater regulator damage could occur. Install external regulator with the vent pointing down as shown in Figure

14.Pointing the vent down protects it from freezing rain or sleet.

External Regulator

Propane/LP

Supply

Tank

Vent Pointing Down

Figure 14 - External Regulator with Vent Pointing Down

Pressure
Regulator
Regulator
Bracket
Heater		3/8" NPT
Heater		Pipe Nipple
Cabinet
		Ground Joint
		Union
	Tee Joint
Test	Reducer	Equipment
Gauge	Bushing to	Shutoff
Connection *	1/8" NPT	Valve *
	1/8" NPT	Inlet Pipe From
	1/8" NPT	External Regulator
	Plug Tap	External Regulator
	Plug Tap	(11" W.C. to 14"
		(11" W.C. to 14"
		W.C. Pressure)

	Tee Joint
Sediment	Pipe Nipple
Trap	Pipe Nipple	3" Minimum
	Cap

Figure 15 - Gas Connection

*A CSA/AGA design-certified equipment shutoff valve with 1/8" NPT tap is an acceptable alternative to test gauge connection. Purchase the optional CSA/AGA design-certified equipment shutoff valve from your dealer. See Accessories, page 19.

105567

FB-3B specifications

Desa FB-3B is an innovative muscle-building device that has gained recognition in the fitness community for its effectiveness and ease of use. Designed to cater to fitness enthusiasts of all levels, the FB-3B integrates advanced technology with ergonomic features that enhance the workout experience.

One of the standout characteristics of the Desa FB-3B is its compact design. This makes it suitable for home gyms, commercial fitness centers, or even smaller workout spaces without compromising on functionality. The frame is constructed from high-strength steel, ensuring durability and stability during intense workout sessions. Its sleek design not only appeals aesthetically but also maximizes the user’s workout area.

The FB-3B offers a multi-functional workout experience thanks to its adjustable resistance settings. Users can easily modify the resistance according to their fitness levels, which allows for personalized training experiences. This feature is particularly beneficial for progressive training, where users can gradually increase the load as they build strength.

Another critical aspect of the Desa FB-3B is its integrated digital monitoring technology. The built-in LCD screen tracks key performance metrics such as time, repetitions, and calories burned. This real-time feedback aids users in setting and achieving their fitness goals, creating a more structured and goal-oriented workout regime.

Comfort is also prioritized in the design of the FB-3B. It features padded seats and backrests made from high-density foam, promoting proper posture and reducing the risk of injury during workouts. The non-slip footrests provide extra safety, allowing users to focus on their exercises without distractions.

Moreover, the FB-3B includes various attachment options, enabling users to target specific muscle groups effectively. From leg extensions to lat pull-downs, this versatility makes the FB-3B ideal for comprehensive strength training.

In conclusion, the Desa FB-3B combines durability, functionality, and user-friendly technology to create a versatile fitness solution for anyone looking to enhance their strength training regimen. Whether you’re a beginner or an experienced athlete, the FB-3B offers features that allow for an effective and enjoyable workout experience.