Desa VN10T Product Identification, AIR for Combustion and Ventilation, Local Codes, Unpacking

Page 3

OWNER’S MANUAL

PRODUCT

IDENTIFICATION

Piezo Ignitor Button

Control Knob

Grill Guard

Burners

Heater Cabinet

Front Panel

Figure 1 - Model VN10T Vent-Free Natural Gas Heater

AIR FOR COMBUSTION AND VENTILATION

WARNING: This heater shall not be installed in a confined

space unless provisions are pro- vided for adequate combustion and ventilation air. Read the fol- lowing instructions to insure proper fresh air for this and other fuel-burning appliances in your home.

Today’s homes are built more energy effi- cient than ever. New materials, increased insulation, and new construction methods help reduce heat loss in homes. Home own- ers weather strip and caulk around windows and doors to keep the cold air out and the warm air in. During heating months, home owners want their homes as airtight as pos- sible.

While it is good to make your home energy efficient, your home needs to breathe. Fresh air must enter your home. All fuel-burning appliances need fresh air for proper com- bustion and ventilation.

LOCAL CODES

Install and use heater with care. Follow all local codes. In the absence of local codes, use the latest edition of National Fuel Gas Code ANSI Z223.1, also known as NFPA 54*.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

PRODUCT

FEATURES

Safety Pilot

This heater has a pilot with an Oxygen Depletion Sensor Shutoff System (ODS). The ODS/pilot is a required feature for vent- free room heaters. The ODS/pilot shuts off the heater if there is not enough fresh air.

Piezo Ignition System

This heater has a piezo ignitor. This system requires no matches, batteries, or other sources to light heater.

Exhaust fans, fireplaces, clothes dryers, and fuel burning appliances draw air from the house to operate. You must provide ad- equate fresh air for these appliances. This will insure proper venting of vented fuel- burning appliances.

PROVIDING ADEQUATE VENTILATION

The following is excerpts from National Fuel Gas Code. NFPA 54/ANSI Z223.1, Section 5.3, Air for Combustion and Venti- lation.

All spaces in homes fall into one of the three following ventilation classifications:

UNPACKING

1.Remove heater from carton.

2.Remove all protective packaging ap- plied to heater for shipment.

3.Check heater for any shipping damage. If heater is damaged, promptly inform dealer where you bought heater.

1.Unusually Tight Construction; 2. Uncon- fined Space; 3. Confined Space.

The information on pages 4 and 5 will help you classify your space and provide ad- equate ventilation.

Continued

102490

3

Image 3
Contents OWNER’S Operation and Installation Manual Infrared VENT-FREE Natural GAS HeaterModel VN10T Vanguard VN10T Natural GAS Heater Safety InformationLocal Codes Product FeaturesProduct Identification AIR for Combustion and VentilationDetermining if You Have a Confined or Unconfined Space Determining AIR Flow for Heater LocationUnusually Tight Construction Confined and Unconfined SpaceVentilation AIR Ventilation Air From Inside BuildingVentilation Air From Outdoors Check GAS Type Installing to WallInstallation Items Installing Heater to WallRemoving Front Panel Of Heater Installing Bottom Mounting ScrewAttaching to wall anchor method Placing Heater On Mounting ScrewsPressure will occur Connecting to GAS SupplyChecking GAS Connections Pressure Testing GAS Supply Piping SystemPressure Testing Heater GAS Connections For Your Safety Read Before LightingTo Turn OFF GAS To Appliance Manual Lighting ProcedureLighting Instructions Thermostat Control OperationInspecting Burner Cleaning and MaintenanceTroubleshooting Observed ProblemPossible Cause Remedy Observed Problem Possible Cause Remedy Observed Problem Possible Cause TopGas leak. See Warning statement at Service Publications SpecificationsReplacement Parts Technical ServiceIllustrated Parts List VN10TODS/PILOT Parts Available not Shown Vanguard VN10T Natural GAS Heater 102490 Limited Warranty Vanguard VENT-FREE Residential GAS Heaters Warranty Information

VN10T specifications

The Desa VN10T is a sophisticated and versatile piece of machinery designed for various agricultural applications. Known for its robust construction and advanced technology, the VN10T stands out in the market for its efficiency and reliability. This model is particularly favored by farmers looking for a tractor that can handle challenging terrains while providing optimal performance.

One of the standout features of the Desa VN10T is its powerful engine. The tractor is equipped with a high-performance diesel engine that ensures not only substantial horsepower but also excellent torque delivery. This makes it particularly suited for heavy-duty tasks such as plowing, tilling, and hauling materials over uneven surfaces. The engine is designed with fuel efficiency in mind, allowing for longer working hours without the need for frequent refueling.

The VN10T features a user-friendly transmission system, providing smooth shifting and excellent control over various speed ranges. This adaptability allows operators to easily switch between tasks, increasing productivity on the farm. The four-wheel drive option enhances traction and stability, making it ideal for diverse agricultural practices, from planting to harvesting.

Technologically, the Desa VN10T is equipped with an advanced hydraulic system. This system allows for precise control of implements, facilitating a seamless execution of farming tasks. The hydraulic capabilities enable the use of various attachments, such as front loaders, backhoes, and mowers, transforming the tractor into a multipurpose tool on the farm.

Comfort and ease of use are also paramount in the design of the VN10T. The operator's cabin is spacious and ergonomically designed, coming with adjustable seating, intuitive controls, and climate control options. Visibility is enhanced through large windows, ensuring the operator can maneuver the tractor safely and effectively.

In terms of maintenance, the VN10T is designed for ease of access, simplifying routine checks and repairs. This reduces downtime and ensures that farmers can keep their operations running smoothly.

Overall, the Desa VN10T combines power, comfort, and advanced technology, making it an excellent choice for modern agricultural needs. Its ability to adapt to various tasks while maintaining efficiency sets it apart as a reliable partner for farmers.