Desa 6000 BTU/HR Lighting Instructions, To Turn OFF GAS To Appliance, Manual Lighting Procedure

Page 10

BLUE FLAME 6000 BTU/HR

VENT FREE PROPANE/LP GAS HEATER

OPERATING

HEATER

Continued

LIGHTING

INSTRUCTIONS

1.STOP! Read the safety information, page 9, column 3.

2.Make sure manual shutoff valve is fully open.

3. Turn control knob clockwise Clockwise to the OFF position.

Ignitor Button

Control Knob

Note: If pilot does not stay lit, refer to Troubleshooting, pages 12 through

14.Also contact a qualified service person or gas supplier for repairs. Until repairs are made, light pilot with match. To light pilot with match, see Manual Lighting Procedure.

Ignitor Pilot

Thermocouple Electrode Burner

TO TURN OFF GAS

TO APPLIANCE

Shutting Off Heater

1. Turn control knob clockwise Clockwise to the PILOT position.

2.Press in control knob and turn clock-

wise Clockwise to the OFF position.

Shutting Off Burner Only (pilot stays lit)

1. Turn control knob clockwise Clockwise to the PILOT position.

MANUAL LIGHTING

PROCEDURE

PILOT OFF

HIGH

IGNITOR

LOW

Figure 16 - Control Knob In The OFF Position

4.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow “B” in the safety in- formation at the top of page 16. If you don’t smell gas, go to the next step.

5.Press in control knob and turn coun- terclockwise C-clockwiseto the PILOT position. Keep control knob pressed in for five (5) seconds (see Figure 16, page 16).

Note: You may be running this heater for the first time after hook- ing up to gas supply. If so, the con- trol knob may need to be pressed in for 30 seconds. This will allow air to bleed from the gas system.

•If control knob does not pop up when released, contact a qualified service person or gas supplier for repairs.

6.With control knob pressed in, push down and release ignitor button. This will light pilot. The pilot is attached to the front of burner. The pilot can be seen through the glass panel. If needed, keep pressing ignitor button until pilot lights.

Figure 17 - Pilot

7.Keep control knob pressed in for 30 seconds after lighting pilot. After 30 seconds, release control knob.

•If control knob does not pop up when released, contact a qualified service person or gas supplier for repairs.

Note: If pilot goes out, repeat steps 3 through 7.

8.Turn control knob counterclockwise

C-clockwiseto the HIGH position. The main burner should light. Set control knob to any heat level between HIGH and LOW. To turn control knob from HIGH to a lower setting, press in the control knob and turn counterclock-

wise C-clockwise .

Note: Both HIGH and LOW are locked positions. You must press in control knob before turning it from these positions.

CAUTION: Do not try to adjust heating levels by using the manual shutoff valve.

1.Remove front panel (see Figure 10, page 7).

2.Follow steps 1 through 5 under Light- ing Instructions.

3.With control knob pressed in, strike match. Hold match to pilot until pi- lot lights.

4.Keep control knob pressed in for 30 seconds after pilot is lit. After 30 sec- onds, release control knob.

5.Replace front panel.

10

103112

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 6000 BTU/HR Models What to do if YOU Smell GASSafety Information Blue Flame 6000 BTU/HR Vent Free PROPANE/LP GAS HeaterAIR for Combustion and Ventilation Product FeaturesProduct Identification Local CodesConfined and Unconfined Space Determining AIR Flow for Heater LocationUnusually Tight Construction Determining if You Have a Confined or Unconfined SpaceVentilation Air From Inside Building Ventilation AIRVentilation Air From Outdoors Installing to WallInstalling Bottom Mounting Screw Installing to WallInstalling Two Mounting Screws Placing Heater On Mounting ScrewsConnecting to GAS Supply MinimumFor Your Safety Read Before Lighting Pressure Testing GAS Supply Piping SystemPressure Testing Heater GAS Connections Checking GAS ConnectionsTo Turn OFF GAS To Appliance Manual Lighting ProcedureLighting Instructions Shutting Off HeaterCleaning and Maintenance Inspecting BurnerTroubleshooting Observed Problem Possible Cause RemedyMaintenance, Gas leak. See Warning statement at top Service Hints SpecificationsReplacement Parts Service Publications TechnicalHeater Exploded View Illustrated Parts ListODS/PILOT Parts List Model VP600BBlue Flame 6000 BTU/HR Vent Free PROPANE/LP GAS Heater 103112 Warranty Information Keep this Warranty

6000 BTU/HR specifications

The Desa 6000 BTU/HR air conditioning unit is designed to provide efficient cooling solutions for small to medium-sized spaces. With its sleek design and powerful performance, this unit has become popular among homeowners and small businesses alike. One of the standout features of the Desa 6000 BTU/HR is its ability to cool spaces quickly and effectively, making it ideal for rooms up to 250 square feet.

The unit operates with a cooling capacity of 6000 BTUs per hour, which is sufficient to maintain comfortable temperatures even on the hottest summer days. This capacity ensures that the unit can handle varying humidity levels, making it versatile for different climates. The efficiency of the Desa air conditioner is reflected in its Energy Efficiency Ratio (EER), which often meets or exceeds industry standards, helping users save on energy bills.

Incorporating advanced technology, the Desa 6000 BTU/HR features a user-friendly digital thermostat that allows for precise temperature control. This ensures that users can set their desired comfort levels easily and monitor the current temperature through an intuitive display. Furthermore, the unit comes equipped with a remote control, providing added convenience for operating the air conditioner from a distance.

The Desa air conditioning unit also includes multiple fan speeds, allowing users to customize airflow according to their preferences. This feature is particularly useful for achieving the perfect balance between cooling efficiency and noise reduction. The integrated filter system ensures that the air circulated through the unit is clean, contributing to a healthier indoor environment. The washable filter is easy to maintain, promoting long-term performance.

Another notable characteristic of the Desa 6000 BTU/HR is its portability. The lightweight design and built-in caster wheels allow for easy movement from room to room, giving users flexibility to cool different areas as needed. This feature is especially beneficial for renters or those living in smaller homes where window installations may not be feasible.

With its combination of effective cooling power, advanced features, and user-friendly design, the Desa 6000 BTU/HR air conditioning unit stands out as a practical solution for achieving comfort during warmer months. Whether used in a bedroom, office, or small living space, this unit promises reliable performance and adaptability to meet the cooling needs of its users.
Top Page Image Contents