Pilot Water Heater

TROUBLE SHOOTING GUIDE

Effective: 5/26/98 Guides are only intended for use on Atwood® products by service technicians who have successfully completed Atwood® training. This guide should be used in conjunction with the appropriate Instruction Manual provided with the product and any applicable Industry standards. This is not intended to be a complete list. Please direct questions concerning service of Atwood® products to 800-825-4328 before proceeding.

CAUSE		SOLUTION
PILOT OUTAGE


Gas pressure incorrect --------------------------	Set pressure to a minimum of 11˝ W.C. with two or more appliances running
Blocked “U” tube --------------------------------	Remove obstruction
Improper main burner alignment --------------	Re-align main burner and main burner orifice holder and gas valve
Improper air adjustment ------------------------	Adjust main burner air shutter approximately 1/4 open
Weak thermocouple------------------------------	Replace thermocouple
Poor pilot flame ----------------------------------	Clean or replace pilot orifice
Weak gas control magnet ----------------------	Replace gas control
Defective E.C.O. in control ----------------------	Replace gas control and check the pilot flame. It should be high enough to engulf
	the thermocouple at all times.
PILOT OUTAGE WHEN BUTTON OR KNOB IS RELEASED


Thermocouple not hot --------------------------	Hold button or knob for 30 seconds before releasing
Thermocouple loose ----------------------------	Tighten connection at gas control
Weak thermocouple------------------------------	Replace thermocouple
Weak gas control magnet ----------------------	Replace gas control
Defective E.C.O. in control ----------------------	Replace gas control
MAIN BURNER WILL NOT IGNITE


Blocked main burner orifice --------------------	Clean or replace orifice
Main burner flame spreader mis-alignment	--Square flame spreader to end of main burner
Blocked main burner ----------------------------	Remove blockage
Improper air adjustment ------------------------	Adjust main burner air shutter approximately 1/4 open
Blocked “U” tube --------------------------------	Remove blockage
Gas control out of calibration ------------------	Replace gas control
ERRATIC MAIN BURNER FLAME


Improper gas pressure --------------------------	Set inlet pressure to a minimum of 11˝ W.C. with two or more appliances running
Improper air adjustment ------------------------	Adjust main burner air shutter approximately 1/4 open
Partial blockage of main burner ----------------	Remove blockage
Partial blockage of main burner orifice --------	Clean or replace orifice
Flame spreader misaligned----------------------	Re-align spreader or replace main burner
Blockage in “U” tube ----------------------------	Remove blockage
Poor gas supply ----------------------------------	Replace gas supply
Exhaust grille blocked --------------------------	Remove blockage
Improper main burner alignment --------------	Re-align main burner, main burner orifice holder and gas valve
SMOKING AND SOOTING


Gas pressure incorrect --------------------------	Set pressure to a minimum of 11˝ W.C. with two or more appliances running
Poor gas supply ----------------------------------	Replace gas supply
Improper pilot flame ----------------------------	Clean or replace pilot orifice
Improper air adjustment ------------------------	Adjust main burner air shutter approximately 1/4 open
Flame spreader mis-aligned --------------------	Re-align or replace main burner
Blocked main burner ----------------------------	Remove blockage
Improper main burner alignment --------------	Re-align main burner, main burner orifice holder and gas valve
Blocked “U” tube --------------------------------	Remove blockage
INSUFFICIENT WATER TEMPERATURE


Temperature selector out of place--------------	Re-set to desired position
Bypass levers improperly positioned ----------	Reposition levers
Improper air adjustment ------------------------	Adjust main burner air shutter approximately 1/4 way open
Partial main burner blockage ------------------	Remove blockage
Improper main burner adjustment ------------	Re-align main burner and main burner orifice holder
Flame spreader mis-aligned --------------------	Re-align or replace main burner
Blocked “U” tube --------------------------------	Remove blockage
	11

94605 specifications

Atwood Mobile Products 94605 is a robust and reliable solution designed to cater to the needs of RV and trailer enthusiasts. This product has gained considerable attention in the market due to its exceptional build quality, innovative features, and user-friendly design.

One of the standout characteristics of the Atwood 94605 is its high efficiency. Designed specifically for recreational vehicles, this product ensures optimal performance, reducing energy consumption while maximizing output. The incorporation of advanced heating technologies allows for quicker heating times and consistent temperature regulation, making it ideal for both short trips and extended outdoor adventures.

The Atwood 94605 is equipped with a lightweight and compact design, allowing for easy installation and integration into various RV models. Its low-profile construction not only minimizes the space it occupies but also enhances its compatibility with numerous vehicle layouts. This careful consideration of design ensures that users can enjoy the benefits of this product without sacrificing space or aesthetic appeal.

Durability is another key feature of the Atwood 94605. Constructed from high-quality materials, this product is built to withstand the rigors of travel and changing weather conditions. This resilience means that users can depend on the Atwood 94605 for years to come, ensuring peace of mind during their adventures.

The ease of use is also a significant aspect of the Atwood 94605. The product boasts straightforward controls that make it accessible for all users, whether they are seasoned RVers or newcomers to the camping experience. The user-friendly interface simplifies the heating process, allowing users to focus on enjoying their trips rather than fussing over complicated systems.

Safety features are paramount in the design of the Atwood 94605. It includes multiple safety mechanisms to prevent overheating and provides users with an added layer of security while in operation. These built-in protections contribute to the overall reliability and trustworthiness of the product.

In conclusion, Atwood Mobile Products 94605 offers an impressive combination of efficiency, durability, and user-friendly operation. With its high-quality construction and advanced heating technology, this product is designed to enhance the RV experience, making it a valuable addition to any outdoor enthusiast's toolkit. Whether embarking on a weekend getaway or a cross-country adventure, the Atwood 94605 is engineered to deliver performance and reliability.