Atwood Mobile Products 94605 Atwood 6 and 10 gallon Pilot Water Heaters, Type of GAS Ignition

Page 6

Atwood 6 and 10 gallon Pilot Water Heaters

Atwood water heaters are designed and approved for use only in recreation vehicles (travel trailers, 5th wheels, motor homes, etc.). They are offered in two sizes: 6 and 10 gallon capacities.

TYPE OF GAS IGNITION -

This unit is ignited outside of the trailer by a match, piezo ignitor or other ignition device. The water temperature is adjustable at the thermostat control.

EXPLANATION OF MODEL NUMBER:

Pilot Models

G

C

H

6

AA

-

7

P

Pilot Relight Version

Type of heating element

(GC_ A - _ = bolt on, GC_ A A-_ = screw in) Gallon capacity (6 or 10)

Engine Heat Exchange

Combination gas and 110 VAC electric Propane Gas

NOTE: When replacing the element on a combination gas/110 VAC unit, always check the back of the heater for the type of element it has. It will either be a bolt-on or screw-in element. They are no interchangeable.

FEATURES

•All units operate on propane gas.

•A heat exchange option is available for motor homes. The water heater tank must have factory equipped heat exchange tubes welded on it already. They cannot be added later. A new water heater tank with this option is the only way to obtain this feature.

•Skin mounting allows the water heater to be hooked up with plumbing and electrical before the sidewall is erected.

•The tank has a clad aluminum lining that protects against corrosion and does not need to be replaced on a yearly or more frequent basis like anode rods do. A more detailed explanation of cladding is found in the back of this manual.

•95% of all servicing can be done on the outside of the water heater. 110 VAC heating components are the exception since they are located on the back of the water heater inside the trailer.

•A flush flange is available for all models. This makes the access door flush with the trailer sidewall.

•There are multiple protection features in the form of a pressure-temperature relief valve, a limit switch in the gas thermostat and an externally sealed combustion chamber.

•On combination water heaters, the gas mode and the 110 VAC heating mode can be operated at the same time since each mode has its own thermostat.

•Both the six and ten gallon units have the lightest weight in the industry.

•On all trailers purchased after June 1, 1997 Atwood Limited Warranty is for a period of two years. This includes all reasonable labor charges.

•We have 650+ Service Centers throughout the United States.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Atwood Service Department This page Intentionally Left Blank Table of Contents Marine Water Heaters Pilot Models Atwood 6 and 10 gallon Pilot Water Heaters Type of GAS IgnitionRecommended Tools and Equipment Thermostat WrenchWhite Rodgers JADE, ITT Gas Thermostat Controls and Pilot AssembliesRobertshaw Unitrol JaderobertshawPilot Sequence of Operation Pilot Adjustment Pilot and Main BurnerPilot Water Heater Heat Exchanger Tubes Engine Heat Exchange SystemAftermarket Heating Elements Or equivalentBOLT-IN SCREW-IN Electronic Ignition Models Atwood 6 and 10 gallon Electronic Ignition Water Heaters Tube Manometer MULTI-METER to Test Continuity & VoltageDSI Sequence of Operation Water Heater Lock OUT Spark Present but no GAS Water Heater Lock OUT GAS Present but no SparkWater Heater Lock OUT GAS and Spark Present Cause Solution Electronic Ignition Water Heater EffectiveInformation Guide Intermittent Ignition Water Heater Effective 8/21/00 To Test Valve Track To Test Power TrackTo Test Lamp Track Thermal CUT-OFF DeviceWater Heater Wiring Schematics Wiring SchematicGeneral Information PRESSURE-TEMPERATURE Relief Valve Rotten EGG Odor AGA CGADSI Warranty Procedures Owner’s Name and AddressManufacturer, Model, Year and VIN # of RV Furnace Hardware Water HeaterRange & Ovens Water Heaters Pilot Water Heater 6 10 gallon Pilot 91591 Electric Side Electric Water Heaters Electronic Water Heater 6 10 gallon Electronic 1E-GH101E,-G10 GAS & Electronic Ignition GASGAS PILOT-RELIGHT GAS/ELECTRIC CombinationElectric Water Heater Description

94605 specifications

Atwood Mobile Products 94605 is a robust and reliable solution designed to cater to the needs of RV and trailer enthusiasts. This product has gained considerable attention in the market due to its exceptional build quality, innovative features, and user-friendly design.

One of the standout characteristics of the Atwood 94605 is its high efficiency. Designed specifically for recreational vehicles, this product ensures optimal performance, reducing energy consumption while maximizing output. The incorporation of advanced heating technologies allows for quicker heating times and consistent temperature regulation, making it ideal for both short trips and extended outdoor adventures.

The Atwood 94605 is equipped with a lightweight and compact design, allowing for easy installation and integration into various RV models. Its low-profile construction not only minimizes the space it occupies but also enhances its compatibility with numerous vehicle layouts. This careful consideration of design ensures that users can enjoy the benefits of this product without sacrificing space or aesthetic appeal.

Durability is another key feature of the Atwood 94605. Constructed from high-quality materials, this product is built to withstand the rigors of travel and changing weather conditions. This resilience means that users can depend on the Atwood 94605 for years to come, ensuring peace of mind during their adventures.

The ease of use is also a significant aspect of the Atwood 94605. The product boasts straightforward controls that make it accessible for all users, whether they are seasoned RVers or newcomers to the camping experience. The user-friendly interface simplifies the heating process, allowing users to focus on enjoying their trips rather than fussing over complicated systems.

Safety features are paramount in the design of the Atwood 94605. It includes multiple safety mechanisms to prevent overheating and provides users with an added layer of security while in operation. These built-in protections contribute to the overall reliability and trustworthiness of the product.

In conclusion, Atwood Mobile Products 94605 offers an impressive combination of efficiency, durability, and user-friendly operation. With its high-quality construction and advanced heating technology, this product is designed to enhance the RV experience, making it a valuable addition to any outdoor enthusiast's toolkit. Whether embarking on a weekend getaway or a cross-country adventure, the Atwood 94605 is engineered to deliver performance and reliability.
Top Page Image Contents