AquaStar 125B NGL specifications For Your Safety, What to do if YOU Smell GAS, Table of Contents

Page 1

INSTALLATION AND OPERATING INSTRUCTIONS FOR AUTOMATIC INSTANTANEOUS TYPE WATER HEATERS FOR USE WITH NATURAL AND LIQUEFIED PETROLEUM GAS

MODEL 125B LPL and 125B NGL (Non-Modulated)

Suitable for heating potable water

Certified for space heating in combination with potable water only

Not certified for space heating only.

Intended for either recirculation to storage or cold water inlet flow that is non-varying.

WARNING

If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable, combustible or corrosive vapors and liquids in the vicinity of this or any other appliance.

WHAT TO DO IF YOU SMELL GAS

- Do not try to light any appliance.

- Do not touch any electrical switch; do not use any phone in your building.

- Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

- If you cannot reach your gas supplier, call the fire department.

- Installation and service must be performed by a qualified installer, service agency or the gas supplier.

TABLE OF CONTENTS

6 720 606 522 (02.01) AL

WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information consult a qualified installer, service agency or the gas supplier. Upon completion of the installation, these instructions should be handed to the user of the appliance for future reference.

In the Commonwealth of Massachusetts this product must be installed by a licensed plumber.

Warning: If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

Specifications

Page 2

Rules for safe operation

Page 4

Locating the Heater

Page 5

Combustion Air Requirements

Page 5

Mounting the Heater

Page 6

Venting the Heater

Page 6

Gas Connections

Page 7

Water Connections

Page 9

Safety before lighting the pilot

Page 10

Lighting instructions

Page 10

About Water Temperature

Page 10

Maintenance & Service

Page 10

Trouble Shooting

Page 11

Diagram of AquaStar

Page 15

Components and Parts List

Page 16

Image 1
Contents Table of Contents For Your SafetyWhat to do if YOU Smell GAS Unpacking the Aquastar Heater FeaturesAquastar Model 125BL General Rules to Follow For Safe Operation Open loop potable water and combination space heating systemWhere IT could Freeze Proper Location for Installing Your HeaterCombustion AIR Requirements Clearances Mounting InstallationVenting To check the draft GAS Connections and Gas RegulatorGAS Line Sizing For Natural GAS GAS PIPING, Connections and Gas RegulatorFor LP GAS GAS Line Sizing Maximum Inlet GAS Flow Pressure SettingWater Connections Altitude Natural Gas Liquid PropaneMaintenance and Service For Your Safety Read Before Lighting the PilotLighting Instructions as seen on front Operating InstructionsPilot Light will not Light IntroductionNo gas to the AquaStar Pilot Lights but Flame Goes OUT When Button is Released Water is TOO HOT Pilot Light Goes OUT During or After USEWater is not HOT Enough Insufficient gas pressure HOT Water Temperature FluctuatesDiagram of AquaStar 125 BL Interior Components Diagram and Parts List 11a Interior Components Diagram Parts List 125BLPage Page Controlled Energy Corp Installation Checklist

125B NGL, 125B LPL specifications

The AquaStar 125B LPL and 125B NGL are innovative products designed to meet the growing demands of modern aquaculture and water treatment facilities. Equipped with advanced features and technologies, these models are engineered for efficiency, performance, and sustainability, making them essential tools for aquaculture professionals and facility managers alike.

One of the standout characteristics of the AquaStar 125B series is its enhanced filtration system. Both the LPL (Low Pressure Liquid) and NGL (Natural Gas Liquid) models incorporate a high-capacity filter that effectively removes particulate matter and impurities from water. This ensures higher water quality and promotes healthier aquatic life. The filtration system is designed for easy maintenance, allowing operators to perform routine cleanings without downtime.

In addition to filtration, the AquaStar 125B series boasts a state-of-the-art aeration system. Efficient oxygenation is crucial for aquatic organisms, and these models utilize fine bubble diffusers to maximize oxygen transfer rates. This technology not only ensures that fish and other aquatic species thrive but also minimizes energy consumption, ultimately reducing operational costs.

Both models feature robust, corrosion-resistant materials, enhancing their durability in challenging environments. The casing is designed to withstand exposure to wet and humid conditions, ensuring longevity and reliability in various operational scenarios. Furthermore, the AquaStar 125B series incorporates energy-efficient motors, promoting reduced power consumption and minimizing the environmental impact.

Another innovative aspect is the intelligent monitoring system integrated into both models. The digital interface provides real-time data on water quality parameters, such as pH levels, temperature, and dissolved oxygen content. This allows for proactive management and immediate adjustments when necessary, ensuring optimal conditions for aquatic life.

Safety is also a key consideration with the AquaStar 125B series. Both models feature built-in safety protocols, including automatic shutoff mechanisms and alerts for abnormal readings, further reinforcing their reliability in managing aquatic environments.

In summary, the AquaStar 125B LPL and 125B NGL represent a leap forward in aquaculture technology, combining advanced filtration, aeration systems, and smart monitoring features. Their durable design and energy efficiency make them suitable for both commercial and non-commercial applications. These models not only improve water quality but also enhance the overall productivity of aquaculture operations while being mindful of environmental sustainability.