Installation | Bradford-White Corp 238-37281-00R specs

Installation continued-

Combustion Air Supply

Figure 1

Minimum Clearances From

Combustible Materials

A 0” (0cm)

B 0” (0cm)

C 3” (7.62cm)

D 78” (1.98mm)

VENT----

IMPORTANT

The flow of combustion and ventilating air must not be obstructed.

All combustion air must be supplied from outdoors by one of the following installation methods and as illustrated in Figure 2. The flow of combustion and ventilating air must not be obstructed. Adequate air must be supplied for combustion and ventilation. An insufficient supply of air will cause recirculation of combustion products resulting in air contamination that may be hazardous to life. Such a condition often will result in a yellow, luminous burner flame, causing carboning or sooting of the combustion chamber, burners and flue tubes with possible damage to the heater.

AIR INTAKE INSTALLATION - 3” (7.6cm) diameter telescoping air intake and leg enclosure are required to supply fresh air to the water heater for combustion (kit P/N 239-37025-01 for 30 gallon (113.5L) water heaters and 239-37025-02 for 40 gallon (151.4L) water heaters. Note: When a mobile home is tightly skirted, an air inlet opening in the skirting must be provided. The opening shall have a minimum free area of at least 9 in2 (22.9cm2). If the opening is screened or covered with a louver, the total free area must be at least 9 in2 (22.9cm2). The following steps must be followed for proper installation of these air supply components:

(Refer to Figure 2).

238-37281-00R specifications

Bradford-White Corp has long been recognized as a leader in the water heating industry, and the 238-37281-00R is a prime example of their commitment to quality and innovation. This specific model is designed for residential applications, offering efficient performance tailored to meet the needs of modern households.

One of the standout features of the 238-37281-00R is its Energy Star rating, which signifies its superior energy efficiency compared to traditional water heaters. This translates to reduced energy bills and a lesser environmental footprint, appealing to energy-conscious consumers looking to save on costs while still enjoying reliable hot water access.

The unit operates with advanced technology that enhances its overall performance. It is equipped with a vortex combustion system that improves efficiency by ensuring complete combustion, minimizing wasted energy. This technology also contributes to quieter operation and increased safety by reducing the risk of gas leaks.

In terms of design, the Bradford-White 238-37281-00R is built with durability in mind. It features a robust tank made from high-grade materials that resist corrosion, ensuring a longer lifespan. The insulation used in the tank is also top-notch, reducing heat loss and improving energy retention, which ultimately leads to increased efficiency.

Installation is straightforward, thanks to the compact design of the unit. It offers versatility in terms of placement, making it suitable for a variety of home configurations. Homeowners can install it in tight spaces without compromising on performance or efficiency.

Another important characteristic of this model is its maintenance-friendly design. Bradford-White provides access to critical components for easy servicing, which can prolong the life of the water heater and maintain performance over time.

Additionally, the 238-37281-00R includes advanced safety features, such as a temperature and pressure relief valve, and an integrated control system that monitors and responds to any potential issues, giving homeowners peace of mind.

Overall, the Bradford-White Corp 238-37281-00R stands out due to its combination of efficiency, durability, and safety. It embodies the company's dedication to delivering high-quality water heating solutions that cater to the needs of today's consumers. With its advanced technologies and user-friendly design, it represents an excellent investment for anyone in search of a reliable water heating option.