Bosch Appliances W125K, W 125...T1 Forward, Installation Instructions, Location, AIR Requirements

Page 3

FORWARD

This design complies with CAN 1-4.3-77 and ANS1 Z21.10.3b 1994 as an instantaneous gas water heater. In addition the unit complies with CAN1-2.17-M80 for use at high altitude, 2.000-4.5000 feet above sea level.

Instalation, operation and maitenance information is provided in this manual. Installation and operation instructions should be thoroughly reviewed before proceeding with installation of the BOSCH instantaneous gas water heater.

The BOSCH instantaneous gas water heater is designed to operate on natural or propane gas; however, make sure that gas on which heater is to operate is the same as specified on the heater’s model/rating plate.

In addition to these instrutions,the water heater shall be installed in accordance with CAN1-B149 Installation Code (in Canada) or ANSI Z223-1/NFFA 54 National Fuel Gas Code (in U.S.) and/ or local installation cades. These shall be carefully followed in all cases.

INSTALLATION INSTRUCTIONS

Note: Proper plumbing, venting, gas connections and an adequate supply of combustion air are required for safe and reliable operation. Ability equivalent to that of a licensed tradesman in the field involved is required for installation and/or servicing of these water heaters.

LOCATION

Before installing the BOSCH instantaneous gas water heater consideration must be given to proper location. The BOSCH W125K... instantaneous gas water heater may be installed to supply hot water to remote locations. Location should be as close to a chimney or gas vent as practical, in an area with an adequate air supply and as centralized with the piping system as possible. The heater should not be located in an area where it will be subject to freezing. The heater should be located in an area where leakage of the heater or its connections will not result in damage to the area adjacent to the heater or to lower floors of the structure.

Note: When such locations can not be avoided, it is recommended that a suitable drain pan, adequately drained, be installed under the heater. The pan must not restrict combustion air flow.

AIR REQUIREMENTS

For safe operation, sufficient air for combustion, ventilation and dilution of flue gases must be available. An insufficient supply of air will result in a yellow luminous burner flame, causing carboning or sooting of the heat exchanger.

In unconfined spaces, in buildings of normal construction, infiltration normally is adequate to provide air for combustion, ventilation and dilution of flue gases. However, a confined space must be provided with two permanent openings to provide combustion and ventilation air to the appliance. Each opening shall have a free area of on square inch per 1,000 Btu/hr of total input rating of all the appliances in the enclosure, but not less than 100 square inches. One opening shall be within 12 inches of the top and one within 12 inches of the bottom of the enclosure.

For either a confined or unconfined space in a building of tight construction, with inadequate infiltration, air must be drawn from the outdoors or from spaces that freely communicate with the outdoors. Two permanent openings located as indicated above are to be provided as follows:

1.When communicating with outdoors directly, or by means of vertical ducts, each opening shall have a free area of not less than one square inch per 4,000 Btu/hr of total input of all appliances in the space.

2.When communicating with outdoors by means of

horizontal ducts, each opening shall have a free area of not less than one square inch per 2,000 Btu/hr of total input of all appliances in the space.

3

Image 3
Contents What to do if YOU Smell GAS Instantaneous gas water heaterLPG DimensionsAIR Requirements Installation InstructionsForward LocationWater Connections ClearancesMounting VentingPropane Supply Lighting Service HintOperating Instructions FillingHigh Temperature Limit Switch To Turn OFF GAS to AppliancePeephole Pressure Relief Valve Preventive MaintenancePilot and Main Burner Venting700 703 700 203 703 305 Page Description Interior Components Diagram Parts List

W 125...T1, W125K specifications

Bosch Appliances has long been synonymous with innovation, quality, and reliability, and the Bosch W125K/W125...T1 models are no exception. These appliances are thoughtfully designed to enhance user experience while providing advanced functionalities that cater to modern household needs.

One of the standout features of the Bosch W125K/W125...T1 is its energy efficiency. These models boast impressive energy ratings that help reduce electricity consumption, making them an eco-friendly choice for environmentally conscious consumers. With advanced inverter technology, the appliances ensure optimal energy use without compromising performance, which not only benefits the environment but also lowers utility bills.

The W125K/W125...T1 series incorporates innovative cleaning technologies, including intelligent sensors that detect load size and soil level. This ensures that each cycle is perfectly adjusted for maximum cleaning power while minimizing resource usage. The auto-dosing feature is another highlight, allowing users to fill detergent and fabric softener in one go, ensuring the right amount is used every time.

The user interface has been designed with simplicity in mind. A sleek, intuitive control panel with clear displays makes it easy for users to select from a variety of wash programs, temperature settings, and drying options. The addition of a smartphone app allows users to control and monitor their appliances remotely, which adds a new level of convenience for busy households.

Noise reduction is another priority in the design of the Bosch W125K/W125...T1. These appliances are engineered with special sound insulation materials and advanced motor technologies that significantly reduce operating noise, making them an ideal choice for open-plan living spaces or homes where quiet is essential.

Finally, Bosch includes robust safety features, such as child locks and overflow protection, to ensure peace of mind during operation. The stainless-steel finish not only contributes to the appliance's modern aesthetic but also enhances durability, promising years of reliable service.

In summary, the Bosch W125K/W125...T1 series combines energy efficiency, intelligent cleaning technologies, user-friendly interfaces, quiet operation, and robust safety features. These appliances exemplify Bosch's commitment to providing high-quality, innovative solutions for contemporary living, making them an excellent addition to any modern home.