Thermostat Adjustment

Before closing the switch to allow electric current to flow to the water heater, make certain that the water heater is full of water and that the cold water inlet valve is open. Complete failure of the heating elements will result if they are not totally immersed in water at all times. When the switch is closed, the operation of this electric water heater is automatic. Surface mounted thermostats are preset to the “HOT” setting to provide a water temperature of approximately 120°F (49°C) to reduce the risk of scald injury. For water heaters with immersion type thermostats, the temperature control knob located on the side on the control box is factory preset to 120°F (49°C). Care must be taken whenever using hot water to avoid scalding injury. Certain appliances require high temperature hot water (such as dishwashers and automatic clothes washers).

CAUTION

Scalding may occur within five (5) seconds at a temperature setting of 135°F (57°C).

TO FILL THE WATER HEATER

1. Close the water heater drain valve by turning the knob clockwise.

2. Open the cold water supply shut-off valve.

3. Open several hot water faucets to allow air to escape from the system.

4. When a steady stream of water flows from the faucets, the water heater is

5. Reconnect power supply to water heater.

TO DRAIN THE HEAT

filled. Close the faucets and check for water leaks at the water heater drain valve, combinationVERSIONtemperature and pressure relief valve and the hot and cold water connections.

Should it become necessary to completely drain the water heater, make sure you follow the steps below:

1.Disconnect the power supply to the heater. Consult the plumbing professional or electric company in your area for service.

2.Close the cold water supply shut-off valve.

3.Open the drain valve on the water heater by turning the knob counter- clockwise. The drain valve has threads on the end that will allow connection of a standard hose coupling.

4.Open a hot water faucet to allow air to enter the system.

To refill the water heater, refer to “TO FILL THE WATER HEATER.”

There are two types of thermostats this electric water heater may come equipped with from the factory. One type, surface mounted thermostats,

238-16152-00F specifications

Bradford-White Corporation is a well-known name in the water heating industry, offering innovative products designed for both residential and commercial applications. Among its extensive lineup, the Bradford-White Corp 238-16152-00F is a standout model that showcases the company's commitment to quality, efficiency, and advanced technology.

The 238-16152-00F is primarily recognized as a gas water heater, built to provide reliable hot water for various needs, from domestic use to larger applications. One of the main features of this model is its high energy efficiency, which contributes to lower utility bills and reduced environmental impact. The unit is designed with advanced insulation technologies and a robust heat exchanger that ensures optimal heat retention and transfer.

Safety is a top priority in the design of the 238-16152-00F. It includes multiple safety features such as a temperature and pressure relief valve, which prevents potential hazards associated with thermal expansion and pressurization. The model is also equipped with an electronic ignition system that enhances reliability while minimizing the risk of pilot light outages. This technology ensures that the heater ignites only when there is a demand for hot water, leading to increased energy efficiency.

Another significant characteristic of the 238-16152-00F is its user-friendly interface, which allows for easy adjustments and monitoring of water temperature settings. This feature is especially beneficial for homeowners who want to customize their hot water experience according to their specific needs.

The build quality of Bradford-White products, including the 238-16152-00F, is exceptional. Constructed with durable materials, the tank is designed to resist corrosion, ensuring longevity and reliability. Additionally, the unit often incorporates features such as a self-cleaning mechanism, which helps to reduce sediment buildup and maintain efficiency over time.

With its combination of efficiency, safety features, and robust construction, the Bradford-White Corp 238-16152-00F is an excellent choice for anyone in need of a dependable water heating solution. Whether for residential spaces or commercial facilities, this model exemplifies the innovation and quality associated with Bradford-White, making it a preferred option in the market.