Back Panel Overview
1. XLR & TRS Combination Inputs
These inputs is are electronically balanced inputs and are compatible with both
2. Woofer Gain
This control adjusts the Subwoofer level. Use the control to blend the low frequency seamlessly with the satellite speakers.
3. Phase Switch
This switch reverses the phase of the Subwoofer. Depending on the placement of the
you may obtain the smoother frequency response if you set the switch to the negative position.
4. XLR Outputs
These outputs are electronically balanced outputs and supply +4dBu signal to the satellite speakers.
5. Power Switch
Turns the power to the
6. Standard IEC Power Input
This power connection should be used with a properly grounded three pin power cable.
7. Heatsink
The heatsink dissipates heat from the internal amplifier. It is important that the heatsink receives proper ventilation. Do not place the heatsink near any exernal sources of heat.
|
| 7 |
|
|
| ® | |
|
|
| L |
|
| INPUT |
|
|
|
| R |
|
| WOOFER | MAX |
|
|
| |
|
| GAIN |
|
|
|
| MIN |
|
| PHASE | + |
|
| - | |
|
|
| |
|
|
| L |
|
| OUTPUT |
|
|
|
| R |
CAUTION:HEATSINK MAY GET HOT |
|
|
|
CAUTION |
|
|
|
RISK OF ELECTRIC SHOCK |
| CONFORMS TO |
|
DO NOT OPEN | US UL STD.6500 | POWER | |
AVIS. RISQUE DE CHOC ÉLECTRIQUE | 3024002 |
| |
NE PAS OUVRIR
WARNING To reduce the risk of fire or electrical Shock, do not expose this equl pment to rain or Moisture.Do not remove cover.No user serviceable parts inside.Refer servicing to quallfied personnal.
AC IN
MADE IN CHINA
1
2
3
4
5
6