American Water Heater NRGSS01210 warranty Residential Gas High, Codes and Standards

Residential Gas High

96% THERMAL EFFICIENCY CONTINUOUS HOT WATER VERSATILE POWER DIRECT VENT

CODES AND STANDARDS

•Design-certified by UL (Underwriters Laboratories) according to ANSI Z21.10.3 - CSA 4.3 Standards

•This model meets or exceeds the thermal efficiency and standby loss requirements of the U.S. Department of Energy and current edition ASHRAE/IESNA 90.1

			FIRST HOUR	RECOVERY			DIMENSIONS
MODEL	BTU	GALLONS	DELIVERY	GALLONS			INCHES/CENTIMETERS				SHIPPING WEIGHT
	INPUT	OR	GALLONS	OR
NUMBER*	PER HOUR	LITRES	OR	LITRES	A	B	C	D	E	F	LBS/KG
			LITRES	90°F/50°C RISE
VG6250T100NV	100,000	50	164	129	66-3/4	49-1/4	22	15-3/4	3	8	255
		189	621	488	169.55	125.09	55.88	40	7.62	20.32	115.7

Inlet and outlet connections: 3/4” male

Circulation loop connections: 3/4” female Gas inlet:1/2”

Maximum Supply Pressure: 14 inches W.C. (3.48kPa)

Minimum Supply Pressure for Natural Gas: 3.50 inches W.C. (.87kPa)

Minimum Supply Pressure for Propane Gas: 8.00 inches W.C. (1.99kPa) Minimum pressure must be maintained under both load and no load

(dynamic and static) conditions.

Electrical Characteristics - 120V, 60Hz, Amperes <5 * Available in LP - Change N to P when ordering.

3” DIAMETER

PVC VENT/EXHAUST

1 3/16” 4 1/2” DIAMETER

1 1/2”

*21 1/8”

3” DIAMETER PVC INTAKE/COMBUSTION AIR

**39”

OPTIONAL CONCENTRIC VENT KIT

Residential gas water heater(s) shall be models ____________ as manufactured by American Water Heaters, or an approved equal, and shall have a ______ -year tank

warranty and a ______ -year parts warranty, when installed in a residential application. Heater(s) shall have a storage capacity of ______ gallons and shall have a rated

input of __________ BTUs, and shall be designed, tested and listed with CSA International in accordance with the latest edition of ANSI Z21.10.1 - CSA4.1 standard.

1992. The interior of the storage tank shall be lined with a Fused Ceramic Shield lining, fused to the tank at 1600° F, forming a corrosion-resistant lining; polymer linings are not acceptable. Each tank shall be furnished with an internal powered anode for cathodic protection. The unit must be equipped with a combination gas control thermostat and non-reset type ECO. A corrosion-resistant drain valve shall be provided on the front of each unit. The tank shall be totally encased in a steel jacket, painted

	Distributed By:
Order Entry and Sales	Warranty and Service
500 Princeton Road (FEDEX, UPS)	500 Princeton Road (FEDEX, UPS)
Johnson City, TN 37601-2030	Johnson City, TN 37601-2030
P.O. Box 4808 (Mailing)	P.O. Box 1597 (Mailing)
Johnson City, TN 37602-4808	Johnson City, TN 37605-1597
(800) 937-1037	(800) 456-9805
FAX (800) 581-7224	FAX (800) 999-5210
	NRGSS01210 Revised August 2010

No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system, without permission in writing from American Water Heaters.