Condensing Design

Residential Gas High

6-Year Limited Tank/ 6-Year Limited Parts Warranty*

96% THERMAL EFFICIENCY CONTINUOUS HOT WATER VERSATILE POWER DIRECT VENT

•Today’s homes demand more hot water than ever before, and the 96% efﬁcient power

need. The 50-gallon heater delivers hot water output that exceeds a 75-gallon atmospheric gas water heater. In fact, the fully condensing design is so advanced, it can deliver continuous hot water for shower after shower…a continuous ﬂow of over

4 gallons per minute. * Yet is easy to install, with height, diameter and installation requirements similar to standard power direct vent units.

HELICAL INTERNAL HEAT EXCHANGER

•Completely surrounded by water in tank, provides much greater heat transfer surface than standard straight ﬂue tube

•Helps produce 96% thermal efﬁciency, which saves money on operating costs compared to a standard 80% efﬁcient gas water heater

•

over time.

POWER DIRECT VENT DESIGN

•Uses inexpensive PVC, CPVC or ABS pipe for intake and exhaust.

•Can be vented vertically thru-the-roof or horizontally thru-the-wall

–2” pipe, vents up to 45 equivalent feet

–3” pipe, vents up to 128 equivalent feet

•Optional concentric and sidewall termination kits available

•96% efﬁcient condensing design

•Equipped with condensate drain tee

SIDE-MOUNTED HOT AND COLD RECIRCULATING TAPS

•Allows water heater to be installed as part of combination space heating/water heating applications or any system requiring a recirculating hot water loop, including radiant ﬂoor heating

ADVANCED ELECTRONIC CONTROL

•Large LCD display

•Precise temperature control

•Advanced diagnostics

COMMERCIAL GRADE GLASS LINING

•Provides superior protection against corrosion

•Protects all interior tank surfaces including inside and outside of helical heat exchanger

TWO HEAVY-DUTY ANODE RODS

• Provides added protection against corrosion

TOP FIRED LOW-NOX GREEN CHOICE® GAS BURNER

•“Eco-Friendly” design reduces NOx emissions and complies with ultra-low NOx emission standards scheduled to be implemented in 2012

CSA CERTIFIED AND ASME RATED T&P RELIEF VALVE

AVAILABLE IN NATURAL GAS OR PROPANE

MAXIMUM HYDROSTATIC WORKING PRESSURE: 150 PSI

VG6250T100NV Series 120 Shown

* 4.31 GPM continuous ﬂow, based on 65ºF inlet water temperature, 110º outlet temperature.

*For complete warranty information consult the written warranty of American Water Heaters found at www.americanwaterheater.com, or call (800) 456-9805.

NRGSS01210 Revised August 2010

No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system, without permission in writing from American Water Heaters.