Operating Your Water Heater

Lighting Instructions

Read and understand these directions thoroughly before attempting to light or re-light the pilot. Make sure the tank is completely filled with water before lighting the pilot.

Check the data plate near the gas valve control/thermostat for the correct gas. Do not use this water heater with any gas other than the one listed on the data plate. If you have any questions or doubts, consult your gas supplier or gas utility company.

Explosion Hazard Replace viewport if glass is missing or damaged.

Failure to do so can result in death, explosion or fire.

LIGHTING INSTRUCTIONS

1.Remove the outer door.

2.Turn the temperature dial counterclockwise to its lowest setting.

		120° F
	130° F	BAR
RESET	130° F
RESET	BAR
BUTTON	BAR
BUTTON
INDEX
BARS
130° F
BAR

6. Depress the reset button all the way
in and IMMEDIATELY depress the igniter	IGNITER
button until you hear a loud click.
Observe the pilot through the view port.
Do not release the reset button. Repeat
immediately if pilot does not light on
the first try. If the pilot does not light
by the fourth attempt with the igniter,
repeat steps 3 - 6. Continue to hold the
button for about (1) minute after the
pilot is lit. Release the reset button and
it will pop back up. Pilot should remain
lit. If the pilot light goes out, repeat
steps 2 - 6.

3. Turn gas control knob clockwise to the “OFF" position.

4.To clear any gas that may have accumulated wait ten (10) minutes.

If you then smell gas, STOP! Refer to the safety warning on the cover. If you do not smell gas go to the next step.

5. Turn the gas control knob counterclockwise

to "PILOT".

IMPORTANT: If the pilot will not stay lit after several tries, turn gas control knob to "OFF" and call your service technician or gas supplier.

IMPORTANT: If the reset button does not pop up when released, stop and immediately shut off the gas at the line valve or tank. Call your service technician or gas supplier.

7. Turn the gas control knob

counterclockwise to "ON".

8. Set the temperature dial to the desired setting.

9. Replace the outer door.

TO TURN OFF GAS TO APPLIANCE

1. Turn the temperature dial counterclockwise	to its	2. Turn the gas control knob clockwise	to the "OFF"
lowest setting.		position.

6510238 specifications

The American Water Heater 6510238 is a noteworthy model in the realm of home water heating solutions. Designed to meet a wide range of domestic hot water demands, this water heater combines efficient performance, advanced technology, and user-centric features.

One of the standout characteristics of the 6510238 is its exceptional energy efficiency. This model is equipped with an advanced insulation system that minimizes heat loss, allowing the unit to maintain optimal water temperatures while using less energy. This not only contributes to reduced utility bills but also aligns with environmentally conscious practices, making it an attractive choice for eco-minded households.

The 6510238 features a high first-hour delivery rating, ensuring that it can meet the hot water needs of busy households without significant wait times. This is largely due to its powerful heating elements, which provide rapid recovery and heating capabilities. Homeowners can enjoy hot showers, clean dishes, and other hot water requirements without the fear of running out.

Another notable aspect of the American Water Heater 6510238 is its durable construction. It is built with a heavy-duty tank that is designed to resist corrosion and extend the lifespan of the unit. Additionally, its glass lining offers extra protection against sediment buildup, further enhancing durability and efficiency.

The unit also incorporates advanced safety features, including a temperature and pressure relief valve, which provides peace of mind to users. This safety mechanism helps prevent the risk of overheating or over-pressurization, ensuring safe operation in various conditions.

Installation and maintenance of the 6510238 have been simplified for user convenience. The water heater is designed with easy-access panels, allowing for straightforward maintenance and service when required. This user-friendly design reduces the time and effort needed for upkeep, making it a preferred option among homeowners.

In summary, the American Water Heater 6510238 stands out with its combination of energy efficiency, high performance, durable construction, and user-friendly features. These characteristics make it a reliable and efficient solution for any household in need of consistent hot water supply. Whether it’s for daily showers, laundry, or cleaning, this water heater is built to deliver optimal performance while ensuring safety and longevity.