American Water Heater 6510238 installation instructions Installation

Page 1

WARNING: If the information in these instructions is not followed exactly, a fire or explosion may result causing property damage, personal injury or death.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

WHAT TO DO IF YOU SMELL GAS

·Do not try to light any appliance.

·Do not touch any electrical switch; do not use any phone in your building.

·Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

·If you cannot reach your gas supplier, call the fire department.

Installation and service must be performed by a qualified installer, service agency or the gas supplier.

Direct Vent

Gas Water Heater

Installation

Instructions and Use & Care Guide

To obtain technical, warranty, or service assistance during or after the installation of this water heater, visit our website at:

http://www.americanwaterheater.com

or call toll free:

1-800-999-9515

When calling for assistance, please have the following information ready:

1.Model number

2.7 Digit product number

3.Serial number

4.Date of installation

5.Place of Purchase

Table of Contents

2

•INSTALLER: AFFIX THESE INSTRUCTIONS TO OR ADJACENT TO THE WATER HEATER.

•OWNER: RETAIN THESE INSTRUCTIONS AND WARRANTY FOR FUTURE REFERENCE. RETAIN THE ORIGINAL RECEIPT AS PROOF OF PURCHASE.

6510238 January 2005 Supercedes 6510220

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Installation 12-14 Unpacking the Water Heater Installing Your GAS Water HeaterConsumer Information Consumer ResponsibilitiesSite Location Residential Garage InstallationVent Cap Termination Clearances and AccessibilityVent Cap Termination Locations Gas Piping Gas RequirementsGas Pressure Natural GAS Pipe Capacity Table CU. FT./HR Gas Pressure TestingVent Pipe System Combustion Air Supply and VentilationThrough the Wall Venting Optional Vertical Extension Kit Vertical InstallationThrough the Roof Venting Water System Piping Piping InstallationClosed System/Thermal Expansion Temperature & Pressure Relief Valve Temperature and Pressure Relief ValveSpecial Applications Solar InstallationCombination Space Heating/ Potable Water System Water Heater Location Installation ChecklistLighting Instructions Operating Your Water HeaterSteps 3 G. Bottled Propane ModelsBurner Flames Water Temperature RegulationStacking Emergency Shut DownOperational Conditions Self-cleaning Some Models Maintenance of Your Water HeaterDraining and Flushing Month InspectionRemoving the Manifold Assembly Replacement PartsRemoving the Burner from the Manifold Assembly Replacing the Thermocouple Replacing the Manifold AssemblyPiezoelectric Igniter System Testing the Igniter SystemRemoving and Replacing the Gas Control Valve/Thermostat Problem Possible Causes Corrective Action Troubleshooting ChartDefective thermostat Replace thermostat Improper calibration Repair Parts List Repair Parts IllustrationAmerican Water Heater Company. All Rights Reserved

6510238 specifications

The American Water Heater 6510238 is a noteworthy model in the realm of home water heating solutions. Designed to meet a wide range of domestic hot water demands, this water heater combines efficient performance, advanced technology, and user-centric features.

One of the standout characteristics of the 6510238 is its exceptional energy efficiency. This model is equipped with an advanced insulation system that minimizes heat loss, allowing the unit to maintain optimal water temperatures while using less energy. This not only contributes to reduced utility bills but also aligns with environmentally conscious practices, making it an attractive choice for eco-minded households.

The 6510238 features a high first-hour delivery rating, ensuring that it can meet the hot water needs of busy households without significant wait times. This is largely due to its powerful heating elements, which provide rapid recovery and heating capabilities. Homeowners can enjoy hot showers, clean dishes, and other hot water requirements without the fear of running out.

Another notable aspect of the American Water Heater 6510238 is its durable construction. It is built with a heavy-duty tank that is designed to resist corrosion and extend the lifespan of the unit. Additionally, its glass lining offers extra protection against sediment buildup, further enhancing durability and efficiency.

The unit also incorporates advanced safety features, including a temperature and pressure relief valve, which provides peace of mind to users. This safety mechanism helps prevent the risk of overheating or over-pressurization, ensuring safe operation in various conditions.

Installation and maintenance of the 6510238 have been simplified for user convenience. The water heater is designed with easy-access panels, allowing for straightforward maintenance and service when required. This user-friendly design reduces the time and effort needed for upkeep, making it a preferred option among homeowners.

In summary, the American Water Heater 6510238 stands out with its combination of energy efficiency, high performance, durable construction, and user-friendly features. These characteristics make it a reliable and efficient solution for any household in need of consistent hot water supply. Whether it’s for daily showers, laundry, or cleaning, this water heater is built to deliver optimal performance while ensuring safety and longevity.
Top Page Image Contents