American Water Heater DIRECT VENT GAS WATER HEATER instruction manual Burner Flame Checks

Page 32

Thermostat Adjusting continued-

DANGER

Hotter water increases the risk of scald injury. Scalding may occur within five (5) seconds at a temperature setting of 140° F (60° C). To protect against hot water injury, install an ASSE approved mixing valve in the water system. This valve will reduce point of discharge temperature by mixing cold and hot water in branch water lines. A licensed plumbing professional or local plumbing authority should be consulted.

Note: This water heater is equipped with an energy cut out device to prevent overheating. Should overheating occur or the gas supply fail to shut off, turn off the manual gas control valve to the appliance and call a qualified service technician.

Note: Whenever the water heater is filled with cold water, condensate will form on the cool tank surface and drops of water will fall on the hot burner and combustion chamber surfaces producing a “sizzling” noise. Condensation is normal and does not indicate a leak. It will disappear when the tank becomes heated.

BURNER FLAME CHECKS

At the time of installation and at periodic intervals (not more than six (6) months), a visual check of the pilot and main burner flames should be conducted. The flames should be similar to those pictured below. The main burner should light smoothly from the pilot. (See Figure 18).

Figure 18

32

Image 32
Contents Direct Vent GAS Water Heater What to do if YOU Smell GASCongratulations Table of Contents General Information Installation Locating the Water HeaterInstallation Locating The Water Heater If YOU Smell GAS Minimum Clearances Optional Direct VENT-AIR Intake Terminal Guard Installation Venting Venting Horizontal and Vertical VENT-AIR Intake Lengths Table a Installation Horizontal and Vertical Vent-Air Intake Lengths VENT-AIR Intake System Installation Tools Required For Vent-Air Intake InstallationInstallation Vent-Air Intake System Installation Installation Vent-Air Intake System Installation Installation Vent-Air Intake System Installation Installation Vent-Air Intake System Installation Installation Vent-Air Intake System Installation Installation Vent-Air Intake System Installation Installation Vent-Air Intake System Installation Water Connections Water Connections Without First Being Certain IT is Filled with Water Water Connections Gas Connections General Operation To Fill the Water HeaterTo Turn OFF GAS to Appliance For Your Safety Read Before LightingLighting Instructions Thermostat Adjustment 160F ControlBurner Flame Checks Maintenance Burner Flame ChecksMaintenance Maintenance Parts List Part Name & DescriptionDirect Vent Water Heater VENT-AIR Intake Kits

DIRECT VENT GAS WATER HEATER specifications

The American Water Heater Direct Vent Gas Water Heater is designed to provide efficient and reliable hot water for residential needs. This innovative appliance combines advanced technologies with user-friendly features, making it an excellent choice for homeowners seeking an optimal balance of performance, safety, and convenience.

One of the standout features of the American Water Heater Direct Vent Gas Water Heater is its direct venting system. This technology allows the unit to draw combustion air from the outside while safely venting exhaust gases directly outside. This eliminates the need for indoor air, making it an ideal solution for highly insulated homes or those with limited indoor air supply.

The unit's delivery of a fast recovery rate ensures that hot water is always available when needed. It utilizes a powerful burner system that generates a high BTU (British Thermal Unit) output, allowing for quicker heating of water. This feature is particularly beneficial during peak usage times when multiple hot water outlets are in use simultaneously.

Safety is a priority with this water heater, which is equipped with a variety of built-in safety features. The flame rollout switch, for instance, serves as a safeguard against overheating, while the integrated gas shut-off valve provides an additional layer of protection against gas leaks. These features ensure peace of mind for users, knowing that their water heater is designed with safety in mind.

In terms of energy efficiency, the American Water Heater Direct Vent Gas Water Heater complies with the latest energy standards. Its efficient design and advanced insulation help minimize heat loss, resulting in reduced energy consumption and lower utility bills. Homeowners benefit from energy savings without sacrificing hot water performance.

Maintenance of the unit is straightforward, thanks to its accessible design. Regular maintenance can extend the life of the water heater, ensuring optimal performance for years to come. Many models come with the option of a maintenance-free anode rod, further simplifying upkeep.

Another appealing characteristic is the water heater’s compact design, which allows for flexible installation options, even in tight spaces. This versatility makes it suitable for various applications, from basements and garages to utility closets.

In summary, the American Water Heater Direct Vent Gas Water Heater stands out for its combination of efficiency, safety, and convenience. With its advanced direct vent technology, rapid recovery rate, and robust safety features, it meets the demands of modern homes while providing reliable hot water solutions. Whether you are upgrading an existing system or installing a new water heater, this model is worth considering for its impressive performance and user-friendly design.