Maintenance

WARNING

Water heaters are heat producing appliances. To avoid damage or injury, do not store materials against the water heater or vent-air intake system. Use proper care to avoid unnecessary contact (especially by children) with the water heater and vent-air intake system. UNDER NO

CIRCUMSTANCES MUST FLAMMABLE MATERIALS, SUCH AS GASOLINE OR PAINT THINNER BE USED OR STORED IN THE VICINITY OF THIS WATER HEATER, VENT-AIR INTAKE SYSTEM OR IN ANY LOCATION FROM WHICH FUMES COULD REACH THE WATER HEATER OR VENT-AIR INTAKE SYSTEM.

IMPORTANT

The water heater should be inspected at a minimum annually by a qualified service technician for damaged components and/or joints not sealed. DO NOT operate this water heater if any part is found damaged or if any joint is found not sealed.

The following maintenance should be performed by a qualified service technician at the minimum periodic intervals suggested below. In some installations the maintenance interval may be more frequent depending on upon the amount of use and the operating conditions of the water heater. Regular inspection and maintenance of the water heater and vent-air intake system will help to insure safe and reliable operation.

1.Annually check the operation of the thermostat.

2.The flow of combustion and ventilation air MUST NOT be restricted. Annually inspect the direct vent-air intake terminal to insure it is not blocked or damaged. Clear the direct vent-air intake terminal openings of any dirt, dust, or other restrictions. WARNING! Certain areas of the direct vent-air intake terminal are HOT.

3.Annually inspect the vent-air intake system to insure that all components are securely fastened and all joints and seams are properly sealed.

4.At all times keep the water heater area clear and free from combustible materials, gasoline and other flammable vapors and liquids.

5.Bi-annually conduct a visual check of the main and pilot burner flames to determine that they are burning properly. See information on page 32

“BURNER FLAME CHECKS.”

DIRECT VENT GAS WATER HEATER specifications

The American Water Heater Direct Vent Gas Water Heater is designed to provide efficient and reliable hot water for residential needs. This innovative appliance combines advanced technologies with user-friendly features, making it an excellent choice for homeowners seeking an optimal balance of performance, safety, and convenience.

One of the standout features of the American Water Heater Direct Vent Gas Water Heater is its direct venting system. This technology allows the unit to draw combustion air from the outside while safely venting exhaust gases directly outside. This eliminates the need for indoor air, making it an ideal solution for highly insulated homes or those with limited indoor air supply.

The unit's delivery of a fast recovery rate ensures that hot water is always available when needed. It utilizes a powerful burner system that generates a high BTU (British Thermal Unit) output, allowing for quicker heating of water. This feature is particularly beneficial during peak usage times when multiple hot water outlets are in use simultaneously.

Safety is a priority with this water heater, which is equipped with a variety of built-in safety features. The flame rollout switch, for instance, serves as a safeguard against overheating, while the integrated gas shut-off valve provides an additional layer of protection against gas leaks. These features ensure peace of mind for users, knowing that their water heater is designed with safety in mind.

In terms of energy efficiency, the American Water Heater Direct Vent Gas Water Heater complies with the latest energy standards. Its efficient design and advanced insulation help minimize heat loss, resulting in reduced energy consumption and lower utility bills. Homeowners benefit from energy savings without sacrificing hot water performance.

Maintenance of the unit is straightforward, thanks to its accessible design. Regular maintenance can extend the life of the water heater, ensuring optimal performance for years to come. Many models come with the option of a maintenance-free anode rod, further simplifying upkeep.

Another appealing characteristic is the water heater’s compact design, which allows for flexible installation options, even in tight spaces. This versatility makes it suitable for various applications, from basements and garages to utility closets.

In summary, the American Water Heater Direct Vent Gas Water Heater stands out for its combination of efficiency, safety, and convenience. With its advanced direct vent technology, rapid recovery rate, and robust safety features, it meets the demands of modern homes while providing reliable hot water solutions. Whether you are upgrading an existing system or installing a new water heater, this model is worth considering for its impressive performance and user-friendly design.